Search results

  1. blkcobra50

    255/45R17 on front wheels

    Has anyone ran a 255/45 tire on their front wheels? How did they look? Any Pictures??? Reason being...I have a little bit of a gap that I want to close up on the front of my 94 cobra with BBK lowering springs. I currently have 245/45's on the front and wondering it will look with a...
  2. blkcobra50

    Injectors and MAF for 94 cobra 331

    Since I put a 331 in my cobra I have retained the stock MAF w/24 lb injectors. I have posted to see what people think about going with 30 lb injectors and proper MAF. For cobra's, is it still the same concept of getting a MAF that is calibrated to the specific size injector? I wasn't sure if...
  3. blkcobra50

    Distributor position!!

    I have a quick question regarding the distributor. I know how the distributor goes in and which way its supposed to face BUT can someone tell me which way the rotor is supposed to face when the engine is at TDC on the compression stroke?? A picture would be great. Thanks.
  4. blkcobra50

    Should I go bigger than 24lb injectors?

    I am not sure what I should do next to the car. I had recently put in a 331. Need to get a new MAF just curious if anyone KNOWS that I should get larger injectors along with my MAF. thanks all
  5. blkcobra50

    Gauge Pods_A-pillar or Instrument Cluster Bezel

    I'm going to be purchasing some autometer gauges and I am torn between the A-pillar dual gauge pod(which I really like) or the dual gauge instrument cluster bezel. For those with either can you let me know your opinions on them. What sort of quality are these pieces? And if anyone has any...
  6. blkcobra50

    245/45R17 Nitto Drag Radials

    Does anyone have any pictures of their car with these tires on them?
  7. blkcobra50

    Ignition System upgrade

    I am looking to get the most power I can out of my current combo. I currently have a stock ignition system. What sort of improvements will I see with a MSD distributor and an ignition box. I also have a 70mm MAF. What would a 80mm ProM calibrated for 24lbers do for me? Anyone have any ideas...
  8. blkcobra50

    What wheel and tire combos? Need advice

    I'm am going to be in the market for some new wheels and tires soon so I would like to know what everyone is running on their cars. Pictures, descriptions as well as technical specs of their combos are all welcome to help me choose. Would like a 17x9" rim I was looking at 98 cobra or 03...
  9. blkcobra50

    backspacing-offset cobra wheels

    Does anyone know what the offset and backspacing is on 94-95 cobra wheels? In the market for some new wheels...Thanks guys Don't know how this double post happened sorry
  10. blkcobra50

    backspacing-offset cobra wheels

    Does anyone know what the offset andbackspacing is on 94-95 cobra wheels? In the market for some new wheels...Thanks guys
  11. blkcobra50

    New 331 running great but 1 issue

    The 2nd closest to the firewall on drivers side lower head stud is leaking a bit off coolant. I used ARP thread sealer but I need to know if I should wait on taking that one stud out resealing it and re torqueing it to see if it will seal itself? I put maybe 30 miles on the motor so far after...
  12. blkcobra50

    Built 331 and almost ready to fire. PICS

    For the past couple months I have been researching about a new motor for my cobra. I finally said lets do it so I have been working on the motor and engine bay for over a month now. Motor is built and back in the car, I just need fluids and some buttoning up of some other stuff and I will be...
  13. blkcobra50

    Pro Products Damper Crank Pulley spacer...what size?

    Does anyone know what size spacer I need for my crank pulley? I am using an SFI Professional Products damper. My cobra has a underdrive pulley stock. Thanks all :SNSign:
  14. blkcobra50

    Cam timing dowel/pin

    Is this the correct name for the pin that goes into the end of the cam and into the cam sprocket?
  15. blkcobra50

    Teflon Rear Main Seal - Worth it??

    Which rear main seal should I use on my 331. There were 2 that I found with a $25 difference. Teflon ($40) or the $15 replacment both by fel-pro.
  16. blkcobra50

    Track Heat/Street Heat Lower Intake

    Is the lower intake for the Street Heat and Track Heat upper intake the same Part # 515L0001? :SNSign:
  17. blkcobra50

    Accufab - no throttle body for our years?

    I am looking for a throttle body to get for my 331 build with TW heads and Track Heat intake. What TB's are being used? Which is best? Thanks
  18. blkcobra50

    Who has a similar setup and what are you putting down??

    I just ordered myself some TFS TW heads and plan on going with a track heat intake. I am building a 331 with a 10:1 CR and an E-303 cam. Anyone have a similar setup or know who does that would like to share numbers? Thanks :D
Top Bottom
Back
Forums
Menu