Search results

  1. 68converted

    Front Lights mystery

    Good golly, I never thought about checking there:shrug: I will add that to the check list. You guys are great!
  2. 68converted

    Front Lights mystery

    I got tied up with another project. I'll be able to check this out on Tuesday night. I am also going to just bite the bullet and do the relays for the headlights at the same time.
  3. 68converted

    Space Saver Spare Questions

    I found one at a salvage yard. The rim is only about 3" wide x 16" tall and the tire is very thin as well. It's solid aluminum, very light. It looks pretty cool. I stood it up next to the new tires and rims and its only about 1/2" shorter. I'll have to dig out the build book to tell you...
  4. 68converted

    Front Lights mystery

    I don't think it's the switch. When pulled on, the rear lights come on, and when you turn the dimmer it dims the dash lights. I would think a bad switch would affect everything?? I found a spare blinker relay so I will also swap that out to see if they will actually blink. I have my...
  5. 68converted

    Front Lights mystery

    I know you guys love a good mystery...:D Ok, my front lights do not work at all: Headlights, front blinkers, side markers/blinkers. Here is what does work out back: Brake lights, Emergency flashers (back only), turn signals just come on steady. Reverse lights. From the lights switch: it...
  6. 68converted

    New 68 Fastback...Project....Maybe

    Mine was pretty good so I thought... 5 years later, and a boat load of work and now it's 98% finished. Be careful. Look under the floor pans, inspect the entire lengths of the frame rails, under the dash, inside the cowls, and inside the trunk. Look at the seems. I should have brought a...
  7. 68converted

    Rear brake line and dual exhaust question

    Well after laying the garage floor for a while, I did just this. I twisted the axle mounting plate, then angled (twisted) the plate that mounts on the underside just beside the frame rail. The two angle changes have given me 3 1/2"s of distance from exhaust. This should be just fine...
  8. 68converted

    Rear brake line and dual exhaust question

    Thank you. I figured as much. Can anyone tell me what they did on the '68?
  9. 68converted

    Rear brake line and dual exhaust question

    I just connected up the "over the axle" pipes and on the rear drivers side, the left/right distribution block that bolts to the top of the axle and the flex line hit the exhaust. Have you guys had this problem? Any suggestions? Did they make a rear distribution and brake line setup that...
  10. 68converted

    Flowmaster vs Magnaflow mufflers

    I have a 5.0L with heads, 270 cam, EFI, Headman shorties and 2 1/2" all the way. I have the Dynomax Super Turbos, but I have friends that have both the Flowmaster, and Magnaflow. Both now want to switch to what I have. They sound so stout and loud at idle, and at WOT just rediculous. Just...
  11. 68converted

    CPRstreetmachines Billet aluminum E-brake handle...

    I would take one! Now if you can just make a cooler one for the Auto Shifter! That would be the real winner. I don't want to have to put an aftermarket shifter on mine but I just don't care for the original's handle.
  12. 68converted

    Flowmaster vs Dynomax

    I have the DynoMax Super Turbos. Wicked tough sound. I had the whole neighborhood out to see what was sounding so dang tough. I don't like the sound of Flows. But who cares what we think. Do what I did... listen to cars around your area. Find one that sounds killer and go as the owner...
  13. 68converted

    Its alive and kickin

    I just wanted to send a very heart felt thank you to all of Stangnet!!! I took her for her first drive as a converted EFI monster. Wow, is all I can say. The last time she rolled out of the garage under her own power was 5 years ago. The car is a beast now. Even without a professional tune...
  14. 68converted

    It's alive and kicking

    I just wanted to send a very heart felt thank you to all of Stangnet!!! I took her for her first drive as a converted EFI monster. Wow, is all I can say. The last time she rolled out of the garage under her own power was 5 years ago. The car is a beast now. Even without a professional...
  15. 68converted

    smog delete plugs??

    Passing Stangnet knowledge along: They are 5/8" x 11TPI. I used 1" long bolt and put some blue ATV on the threads just for grins.
  16. 68converted

    twEECer tuners in South Denver area?

    Went to Pinks All Out filmed here in Denver. Wow. I have to get this thing running correctly. Do I have to buy a tweecer? Can I borrow someone's or is it something that needs to be left in the car? From what I have read, I would just be updating the code in the EEC. Does anyone have...
  17. 68converted

    twEECer tuners in South Denver area?

    Is there anyone in the South Denver area that will let me use their twEECer or help me out? How about info on shops that would help me with a tune? Any info would be great. thanks
  18. 68converted

    Best chip/tuner for modded 91

    Thank you sir, I am not sure what my friend was taking about then. Maybe he was thinking I had a 2001? I will check out the Tweeker now.
  19. 68converted

    Best chip/tuner for modded 91

    Guys, I finally got a call back from my buddy that works on 5.0's... Well, gotta love knowledge... I need to get a chip/tuner for the computer as the mods I have done will need it. What is the difference between a chip and a tuner? Are they one in the same? He said I would need a custom...
  20. 68converted

    Tuning help needed

    I have no idea where to start, so I am throwing it out there to see if anyone is available to take a look, or recommend a shop I could go to.
Top Bottom
Back
Forums
Menu