Search results

  1. D

    65/66 VIN/Title

    man I have never heard of it being on the rear frame rail. Maybe becouse most frame Rails Have surface rust around here.
  2. D

    65/66 VIN/Title

    If it has a door tag there are place that sell inner fenders that will stamp a new vin code for yea. I also have a junk yard close to my dads with about 4 fastbacks in it that you could but for 200 bucks. One might even be an A code.
  3. D

    Floor boards Rip them out or clean them Up

    Ok what to do. The owner before me did allot of floor board work and who knows what else under the car. The problem is it’s a piss poor job. The work that was done on the floor probably is not more then 3 years old . The welding is not smooth at all with allot of splatters and even small...
  4. D

    Convertible 1967 Eleanor Shelby clone ?

    Ah yea see and the vert looks just as good in my own opinion. I think I will stay with my car but one can always dream . If I had the money I would have a Fleet of mustangs but wouldn't we all HE HE.
  5. D

    Trunk Area

    No one carries a spare tire ? I don't see any spare tires in those pictures .
  6. D

    Convertible 1967 Eleanor Shelby clone ?

    Well A 6 cylinder convertible and a junkyard V8 coup would do just fine. Not like I want to cut up a GT or S code for it. I was just wondering if it had been done yet.
  7. D

    Convertible 1967 Eleanor Shelby clone ?

    Not that I am a big fan of the Eleanor Fastbacks but have you seen the prices on these things. Has any one found a convertible 1967 thats some one has made into an Eleanor shelby clone. I know the movie was a fastback but you could get the same look make it a cross between that and the 1968...
  8. D

    Engine BAY paint color Questions

    ok if thats not black in the interior. What about the brake and clutch pedal Arms ?
  9. D

    Engine BAY paint color Questions

    Yes but does it go black on the interior side ?
  10. D

    Engine BAY paint color Questions

    I want to know the color for the clutch bar release equalizer and the gas pedal bar that comes through the firewall from the gas pedal. On a 1966 automatic car I looked at that was at the atlantic city auction last month the gas bar was metal color. Is that correct I am guessing that the bar...
  11. D

    289 hipo heads off ebay - are they worth it?

    From my research on the subject . Take it for what you will. The Hipo head were the same as any other 289 heads. The only diffrence was it would alow for the HIPO CAM with Mechanical Valve Train . You could get higher RPM out of it with no Valve Float. The Valves were the same in size as any...
  12. D

    How much juice do I need from my Altenator?

    I have a 1966 mustang with a 55 AMP altenator. What size do I need to power two 200 Watt MTX amplifiers along with the 10 disc changer radio and equlizer ?
  13. D

    Fan and Pulley Alternator whats there color?

    Whats the original Color of the fan and pulley on the alternator suppose to be for a 1966 289 ?
  14. D

    Buying Parts!!!

    I have used mustang unlimted, NPD and Cj poney parts. I liked NPD the best for the variety of parts .
  15. D

    Roller Motors Will They REV APART

    I have 3.55 in the rear end .
  16. D

    Roller Motors Will They REV APART

    so if I get a REV limiter set it for what a little over 5 k ? or at 6k. No the engine is not that modified its just a Cruiser Car.
  17. D

    Roller Motors Will They REV APART

    Need to know if I should beef up my 289 before I button her up after her rebuild. I made it an all roller motor. The Cam is a 270H , 9.7 -1 forged pistons, f4b edelbrock intake , holley double pumper 600 cfm, petronix ignition and JBA shorty Headers. The heads have been gone through with...
  18. D

    4BBL quench heads came today.

    Have the valve guides cheaked and replace the bad ones. Then make sure you have hard Valve seats for unleaded Gas. these will not increase peformance but will give you better heads. Other then that it starts to get into money.
  19. D

    correct valve covers for 66gt??

    Only way your going to know is to look at the date codeing on the engine block. there are alot of Dress up kits out there that have diffrent valve covers. Another reason may be that these are not original heads and some one has roller arms on it that needs the taller valve covers.
  20. D

    8 or 9 inch posi finder help- guru's?

    http://www.ultrastang.com/Rearinfo.asp?Page_ID=1 cheak this web page out
Top Bottom
Back
Forums
Menu