Search results

  1. S

    running problem

    I have a supercharged 351 with a paxton sn200 blower on it. It has a 600 lift cam, vitor intake ported and polished, afr 205 heads, aeromotive fuel system, msd ignition, anderson pms, 3 bar map, 38lb injectors, 75mm tb, 80mm mass air and a lot of other stuff. at idle it runs fine, sometimes...
  2. S

    help quick please

    thanks for the pix, does anyone possibly still have the installation instructions
  3. S

    help quick please

    I am looking for any installation instructions or any photos of this supercharger (sn2000 paxton) installed on a car. I know its old but please help Thanks
  4. S

    Attn. Rick92gt

    someone else told me the name :doh:
  5. S

    Attn. Rick92gt

    Attn. Rick91gt I do not know how to get a hold of you, but I would like to talk to you about the torque box reinforcements for a 88gt. aim-v8pony707 Thanks
  6. S

    01 Gt 4.10 gear what rpm

    You don't have 4.10's
  7. S

    You think these bad boys are going to fit

    i have 275/40/17 w/o quad shock and fit perfect
  8. S

    Fuel Experts please help

    Okay, so here is my set up 351w, scat crank, h beam rods, srp pistons, hyd roller blower cam (custom grind), afr 205's, edlebrook upper and lower, 7-10 psi from sn2000 paxton blower. Altogether makes 8.9:1 compression, most likely 75mm tb. I need help choosing injector size, mass air size and...
  9. S

    Is it really needed???

    I am in the process of putting all guages and computer software into my car. My firend is telling me that something such as the dynojet wide band commander is necessary for air/fuel and data logging. Is this necessary since I just ordered the pms system? I know the pms is more for fuel but...
  10. S

    Gauge Question: Is 18 gage really enough?

    hey Andres2882, Where are you going to run the power wires for the gauge? I ran the power wires for the lights to fuse 13 but where are you going to run the power wires for the gauge itself?
  11. S

    Where to run wires

    I am in the process of installing gauges in my car. My question is where do you run your power wire for the light. I heard of running a "add a fuse" but I am not sure which fuse to plug it into. Can anyone offer any suggestions?
  12. S

    what size wheel spacer

    I have an 88 gt with a sn95 brake swap for the fronts. The brakes came off a 94 gt. I have 3 1/2 weld draglites for the front but they will not clear the caliper. What size wheel spacer will I have to run. I am looking at the bolt on spacers form maximum motorsports not the cheap ones for...
  13. S

    Im losing coolant

    get it pressure tested. It could be from the water pump. Check the connection where the hoses fit onto the heater core tubes. It could be a blown headgasket where the water jackets are, thus no evidence in oil and no smoke out the exhaust. How much coolant are you losing?
  14. S

    Rear control arm bushings upper install

    On the old ones, or at least for mine, you can see where they stopped. Measure that distance and make it the same distance on the new ones. A mallet works well, just make sure you hammer evenly when installing.
  15. S

    What Should I Do???

    I am currently in the process of getting a brand new engine. I wanted a dart based engine but can not afford the expensive block and work to get it machined out. What would you suggest looking at. I am planning on having around 500 rwhp so I really dont want to work with a stock block. Would...
  16. S

    Too Much Torque???

    Thanks guys for the input. My friend just got a welder so we will weld those up. BTW Rick this is [email protected], I have been talking to you about the engine build. (Timm) Thanks
  17. S

    Need Help

    I ahve searched and found many threads concering my question. My question is how do you get the rear upper control arm bushing in. I have the moog part with the bushing in the metal sleev already. People say just tap it in but where do I tap, can I tap on the rubber or the betal sleeve? Thanks
  18. S

    Too Much Torque???

    I am in the process of building up my car. I am putting on control arms in the rear right now. as I was underneath the car I noticed there were a few cracks in the floor pan (looks like cracks in the cement). It is right above where the driveshaft meets the diff (I can see up there because...
  19. S

    quick exhuast question

    thanks for the help. I took it off what is now going to be my racing car and going to put it on my other 5.0, I was just wondering if I needed the part because it got damaged in the process of removal. My daily driver 5.0 has one that I can use so I am in the clear Thanks
  20. S

    quick exhuast question

    I just removed an h-pipe from an 88 gt and I was wondering what the valve is that is a part of the h-pipe. It looks like it attaches to the egr valve trhough a small piece of hose. What is this valve called. when I removed it I think it got damaged. If I am not clear enough let me know and I...
Top Bottom
Back
Forums
Menu