Search results

  1. Nvidia

    removing stock h-pipe

    I had the same damn problem with the smog hose clamp. You're talking about the golden peice that looks like it could be on the end of a garden hose attaching it to an outside faucet, right? I ended up giving up cause everyone was telling me to just cut it off, but then had others telling...
  2. Nvidia

    New motor slower than stock ... READ

    I agree. Good luck getting it fixed. :)
  3. Nvidia

    Supercharger install questions and help? Also valve cover install help?

    Lol, thanks again for the quick reply. :D One more question for you: I went and found the specs for my cam online - is this a boost-friendly camshaft? 221/223° duration at .050, .509/.509 in. lift with a 107° lobe separation If not, what would you recommend for a good blower cam?
  4. Nvidia

    Supercharger install questions and help? Also valve cover install help?

    Wow, thanks for the quick answer. :) If I did go 9 PSI, what size on the injectors, MAF, and TB? Someone else earlier up the thread was mentioning the Lightning deal with the 90mm MAF and 42# injectors. Assuming I went with that, would it be too big? Also, TB? 70? 75? I also notice on...
  5. Nvidia

    Supercharger install questions and help? Also valve cover install help?

    that seems like a pretty damn good deal. I think I might purchase one of those in the near future as well. Anyone know what kind of power I'd be pushing with 6 and 9 PSI? Enough to strain the block? I'd probably go the FMU route as well. Also, what size injectors, MAF, and TB should I look...
  6. Nvidia

    H/C/I Combo...3 to pick from

    Well, obviously I'm a bit biased in my decision, but I LOVE my Holley SysteMax II kit. If you look up Holley's dyno numbers for their kit with the supporting hardware, they're making 350 HP. I don't know if that's to the flywheel (probably, you'd have to call and ask them), or to the wheels, as...
  7. Nvidia

    O/R H-Pipe Install

    see, this is what doesn't make sense to me. From what I'm gathering from all of you, it sounds like what SHOULD be under there is a rubber hose that is bendable, and cutable. What I actually have is a metal tube that isn't bendable. There are weld marks on both sides of it, where it connects...
  8. Nvidia

    O/R H-Pipe Install

    How would I go about securing the pipe after it's cut? I would probably need something that was high-temp to keep it in place down there? I went and looked at the piece again and I do believe it was cut several times. It looks like the guy just welded it back on each time he needed it...
  9. Nvidia

    O/R H-Pipe Install

    Just decided today that I was going to attempt to install my O/R H-pipe cause it's been sitting on my garage floor for a few weeks. I've got the back unbolted, but I'm having a problem with the mid-section near the cats. There's this metal tube that stretches right from inbetween the small...
  10. Nvidia

    Best fitting long tubes?

    As far as fitment the second time around, most people say to go with the BBKs, because they have a one-piece flange. When it comes to MACs, they are individually bolted on, and some claim that over time the heat warps them into not fitting. On the other hand, some say MAC makes more HP with...
  11. Nvidia

    5.0L Fox powered by Eaton M90 Supercharger

    Could you run the Eaton M112 on a 5.0 as well? I LOVE that whine :drool:
  12. Nvidia

    Stang broke down today... what happened?

    Just found out what was wrong with it... broken TP Sensor... how much do they usually run? :nonono:
  13. Nvidia

    Stang broke down today... what happened?

    Damn, this couldn't have come at a worse time... I was driving this morning and when I was pulling out of the driveway this morning, I noticed that the car felt REALLY sluggish. It felt like it was engine braking on me. I got to the top of a hill about 3 minutes later and started to go...
  14. Nvidia

    Check out this 160mph speedo

    Yep... the million-mile speedo. :D There wa a pretty big thread a month or two back about it when someone found a car on ebay with it. This is the second one I have seen.
  15. Nvidia

    What would you consider to be the "Swiss Army Setup" of Mustang Suspension?

    Let's say that you were putting down over 500 RWHP, and you wanted a suspension that hooked with no problems. You also wanted a setup that cornered pretty well. Money is not an issue. What would you do? Can it be done?
  16. Nvidia

    262rwhp

    Yeah, ditch those platinum plugs ASAP and get copper ones... I've heard tons of horror stories about people who used the plats and had horrible engine performance. Check again after you fix that.
  17. Nvidia

    Would I benefit from a set of LTs?

    Just like the title. I picked up this 88 last weekend, and I was thinking with the power it was making, I could gain some by switching to longtubes? I was thinking that at least. I've had a few different people tell me though that I'll actually lose power by switching out the shorties. What's...
  18. Nvidia

    Really weird problem.....need help ASAP

    LMAO! Way to be mature about some advice that JUST MIGHT HELP YOU LIVE A LTITLE LONGER. I'm not the F'er here. Your friend is, and you're an even bigger F'er for letting him get in the car and drive away, while you full well knew he was wasted. And don't bitch when someone gives you...
  19. Nvidia

    Mac Pro-Chamber

    No sir, I meant that if you threw cats on it, it would sort of defeat the purpose of the Pro-Chamber (to be loud) :D Edit: Yeah PoopDawg - care to spill TEH beans? I thought Prochambers only came in Off-Road versions?
  20. Nvidia

    Mac Pro-Chamber

    That's an awesome question. I'd really like to know as well. I would imagine cats on the Pro-chamber would kind of defeat the purpose of it, but then again, it might crank out some wicked noise no one's ever heard before because no one's ever tried it. :D Depending on the response, I might...
Top Bottom
Back
Forums
Menu