I am installing a BBK intake. It has 2 places for vacuum. One for pvc and another one I was gonna use for the Zex. What do I do with the one that comes off the tree that went to the back of my other intake? Also there is a another set of vacuum hoses on the left side (some went to egr, one to...
Here's the problem. I have a BBK SSI intake and a 75 MM Accufab throttle body. The thottle body spacer wont fit the intake. The intake has a raised piece right next to where the thottle body goes. My IAC wont fit on the throttle body because it hits the intake. I thought about using a different...
I am putting together my new engine. It didn't come with the dowel pins that line up the timing chain cover. Anyone know a part number for these or if this is a dealer item. I tried to get them out of the old block but I destroyed them.
What does this tool look like? I looked on line and they had 4 or 5 different ones. Also, I need new dowels that go into the timing chain cover. The new engine didn't come with them and I destryed the old ones trying to get them out. Anyone know if they have these at advanced or auto zone?
Everything is undone. The steering shaft wont come off. I took the nut out of the little C clamp looking thing just below the ragjoint but it wont come out. Any suggestions.
I have a Zex nitrous system and haven't filled the bottle lately. I filled it the other day but the nitrous solenoid isn't opening . I tried setting TPS. I can set the idle voltage to .995 but it only goes to 4.5 at WOT. Do you think this is a TPS problem or a solenoid problem?
Just replaced tranny after rebuild. When I tried to start it I just get a series of clicks but it doesn't turn over. Battery is fully charged. Any Idea's?
2005 GT Premium, shaker 500 , 5 speed , doesn,t have my color dash thing . Has 7000 miles. they want 28,000 for this thing. The original sticker was in the glove box and MSRP was 27,800. Are they marked up that much?