Search results

  1. STROKED_LX

    Clutch question (84 stang 2.3L turbo)

    Friend of mine with his 84 stang 2.3L turbo wants to know if a 96 mustang GT clutch would fit in his 5 speed.
  2. STROKED_LX

    Which 5 speed should i get?

    i plan to do a 5 speed conversion. I was wondering which 5 speed can suport 700rhp+ and how much will i be spending for just the manual trans only. Or would it be better to go to a 6 speed?
  3. STROKED_LX

    wheel back spacing question.

    thanks yall. btw: i found a post while doing a search from user name "DNA DOA" on this forum, this guy has 15X9 draglite with 5.5 backspacing heres the picture i want mine to look like this. and i was wondering if 6inch backspacing is correct or 5.5bs on 15X9 weld draglite.
  4. STROKED_LX

    wheel back spacing question.

    do you think weld would ever make a custom draglite wheel 15X8 and 5 inch back spacing? i think im about to get a set but want to know what other size might fit, what about the 15X10's whats a good backspacing for that rim? is it possible to fit them with no spacer and some modification, with...
  5. STROKED_LX

    backspacing????

    does weld 15X8 with 5.5 back spacing stick out side of the fender? do you need to roll the fender lip?
  6. STROKED_LX

    Need help with Fuel pump realated.

    my friend has a 1986 Ford mustang turbo 2.3L and he gots mega problems i been tryin to help and im stumped! he put a new fuel pump and the car doesnt prime up, i checked everything i could think of and still wont prime up. fuel pump relay seems to be fine, im getting voltage to the pump when...
  7. STROKED_LX

    no over drive?

    i have a 89 LX coupe, i just resently adjusted my TV cable ran fine for couple weeks and all of a sudden today it stop going into over drive. i been having problems with my AOD, never had it shifting right even after rebuilding the tran's, im gonn do a swap and go manual. Can anyone help me...
  8. STROKED_LX

    AOD TV cable adjustment

    oh cool ya i get what your sayin, ill try and re-adjust it while someone else push the pedal fully. Thanks
  9. STROKED_LX

    OVERHEATING ISSUE

    have you done a radiator pressure test yet?
  10. STROKED_LX

    AOD TV cable adjustment

    alright i did the adjustment cause it felt like it was way off. now im wondering how do i know if its done right, because i followed the instructions but didnt do it like the way dealer would do it with the trans line pressure gauge. but the adjustment i did was pull the plastic piece all...
  11. STROKED_LX

    4.6L intake manifold

    Thanks for the input all, ive looked on ebay but i would like a factory fit intake with no modifications needed. im doing the swap myself. (its on a buddy's car) How do i check if its a NPI or PI. On the link, at the bottom "Additional modifications and parts required" what excatly would...
  12. STROKED_LX

    4.6L intake manifold

    does anyone know where i can get a 4.6L intake manifold for cheap, part number F6S2-9424 AA its for a 97 Thunderbird. the plastic thermostat housing cracked and coolant flowing out. Ford dealer is asking me $557.39 if anyone knows a cheaper place with that same part number, let me...
  13. STROKED_LX

    TV cable question

    TheBocSez it was the orginal metal clip that came on there. the Dealer told me they had no part number for it. FzyBnyFeet ya ill probly have to make my own custom clip.
  14. STROKED_LX

    Frozen collector bolts, help!!

    try running the bolt in and out several times using that penetrating spray. ive also used the cutting tool when all else failed.
  15. STROKED_LX

    TV cable question

    Thanks guys ill try it. i was hoping to find the orginal clip that it had but i guess ill have to go aftermarket on that part.
  16. STROKED_LX

    TV cable question

    ive accdently lost the pin holding my TV cable to the throttle body, is there anywhere i can buy one. i tried ford dealer and searches everywhere and can not find it. my trans is a AOD
  17. STROKED_LX

    wheel back spacing question.

    thats awsome, thank you very much for that bit of info., ill try looking for a set of draglite xp.
  18. STROKED_LX

    wheel back spacing question.

    whats the correct back spacing for a 15X8 weld draglite wheel to fit on my 89 notchback
  19. STROKED_LX

    Low voltage

    ive noticed my voltage very low, i dont know what the problem is because ive tested the altenator puts out 70+ amps, all the wires are in good condition and have a good connection. I notice this problem only after the engine reaches operating temptures. anyone got any ideas?
View older results
Top Bottom
Back
Forums
Menu