Search results

  1. D

    grant steering wheel

    1 - In some states, they'll fail you on inspection. 2 - I believe momo makes an adapter
  2. D

    Electric Fan cooling in "HOT" Texas ???

    Completely understood and excellent points bro... I was careful to mention this is a stroker which means I'm dealing with a thinner cylinder wall than OEM and I'm also running a higher CR than OEM. Not to mention...I've seen guys run quarters without any fan at all...whereas my sorry ass...
  3. D

    Electric Fan cooling in "HOT" Texas ???

    I've wanted to free up HP on my 347 by installing an electric fan configuration on my EFI 92 LX. While the recent weather has been nice, I need something to work reliably in 100+ degree heat...even "IF" I do get stuck in traffic. I already have a Griffin 3-row aluminum radiator. Is...
  4. D

    Fox Rear-end brake bracket help needed

    Unfortunately, I looked at that picture on eBay as well and I can't see what specific portion of the rearend that the bolt, which is fused to the bracket, goes through. It almost looks as though it bolts through a hole through the webbing of the rearend on the drivers' side, but I'm not going...
  5. D

    flaming river shaft?

    I just installed the Flaming river unit... and had no problems...and YES, I have stock power steering. It's a quality product. The only caveat is that you'll need to trim the solid steel shaft to the size that fits your car. This is a not brainer as you can line up the OLD and the FR unit...
  6. D

    Fox Rear-end brake bracket help needed

    Situation: - The original and entire rear-end was removed and sold. This included all brake lines, control-arms, brakes, etc. - I installed a new/complete FMS rear-end I later installed aftermarket Stainless Steel brake system, control-arms, etc. Problem:: I'm...
  7. D

    Line Lock as a Security device

    B&M 46075 Line Lock Loc Launch Control Solenoid I should have been more clear. The car will be garaged, but when I step out to a restaurant or something like that, I thought it would be "nice", not necessary, to lock those front wheels down.
  8. D

    Line Lock as a Security device

    If I used a toggle switch on front-brake line lock setup, what problems do you foresee with my pressing the brake pedal, putting the toggle into the "ON" position, and walking away from my car ? Will this damage the solenoid ? Will it result in a drain on the battery ? Just wondering if...
  9. D

    92 vs 94 front spindle differences ?

    I'm considering converting to 1994 spindles for my 1992 LX for the purpose of upgrading the Brake System. Can anyone tell me if this will push the wheel out further or not ? TIA
  10. D

    Complex Wheel fitment issue

    - I have a 92 LX Convertible - 1994 front spindles - Stainless Steel Brakes Big Brake System - I need an offset of 2.21" to clear calipers - There's 4.0" distance between stock inner fender well and the mounting surface Any ideas or suggestions for how I find a wheel to fit this...
  11. D

    rear qtr window fell out (convertible)

    The rear qtr window on our 2001 convertible fell out of it's track yesterday. It's now lying down inside the panel, next to the scissor arm which is still moving freely up and down. If anyone can provide directions or any form of assistance with how I should fix this, it would be greatly...
  12. D

    Customizing Wheels (cut/weld)

    I'm looking for a qualified outfit which can cut and reweld outer rim of some wheels. (( This is a custom application )) Any help would be greatly appreciated. TIA
  13. D

    swiss cheese engine bay

    Aside from the obvious usage of bondo, are there any other ways people cleanup/cover all the holes in the engine bay ??? TIA
  14. D

    Engine bay harness removal

    Great advice that worked quite well. What about the large harness which goes through the firewall on the drivers side ? Did you pull that harness out as well ? TIA
  15. D

    Cleaning overflow canister

    Is there an effective way to cleanup my old Coolant overflow canister to make it look clean white again ???
  16. D

    Engine bay harness removal

    I've slowly but surely been stripping down my 92 Fox Conv for a complete change in color. The outter dash has been removed, but much of the frame and air boxes are still fastened to the firewall..... What's the simpest/cleanest way to pull these wire harnesses through the firewall ?? Do...
  17. D

    Rear Brake Change problem -ASAP

    NEVERMIND.... Hook up rachet attachment to 3/8" impact wrench... the jostling did something to help. Back to work...
  18. D

    Rear Brake Change problem -ASAP

    When replacing pads on rear, I have to use a special socket attachment tool to turn-in the single piston. Driver's side worked with no problem The passenger side however is turning but not receeding. I've attempted to apply some minor pressure to push piston in a little. This did not...
  19. D

    Engine / Hood Clearance (92)

    I've got a 347 stroker using larger fuel rails and taller valve covers to clear upgraded valvetrain assy. I had to use a 1" phenolic spacer. Does anyone "KNOW" if my stock hood will work with this combination ? TIA
  20. D

    Tremec guys...Question for all of you!

    It was my understanding, because this is what I have read and been told, that a tremec (tko) would require a different bellhousing. Google:: Tremec D9CZ-6392-C
Top Bottom
Back
Forums
Menu