Search results

  1. Manewaymja2

    Need Help on Misfire Problem.......

    Hey guys bought a 1989 GT Mustang with some Mild Mods to engine and sent it to a dyno shop in Kentucky (a guy named Greg at Speedy Dyno to Tune the car for race fuel and Pump gas) Trying to get like at the 450RWHP area. But now he has come up with a problem. Let me explain as he told me and you...
  2. Manewaymja2

    MSD RPM Switch wired up need to know if done right.....

    49 Views, man im i the only one out there with a MSD RPM window Switch? Like i said in the original Post its working but seems to activate with WOT switch as well so its almost as if the RPM window Switch isnt there.
  3. Manewaymja2

    MSD RPM Switch wired up need to know if done right.....

    Help anyone..................:shrug::shrug:
  4. Manewaymja2

    MSD RPM Switch wired up need to know if done right.....

    This diagram shows the window switch controlling the Solenoids, but i already have a WOT switch hooked up. I have seen diagrams online show how i hooked up my own but im trying to figure out if something is wrong with the way i hooked my own up.///// Anyone else. Heres the diagram i followed:
  5. Manewaymja2

    HELP JUST BUILT CAR AND HAVE CODES

    Hi there, heres what i can tell you and i will not attempt to answer queations i dont know anything about. 29 thats the VSS, Vehicle Speed Sensor, just changed my own, its on the drivers side of the gear box that the Speedometer cable hooks up to, along with a plug thats for the Sensor. I...
  6. Manewaymja2

    MSD RPM Switch wired up need to know if done right.....

    Hey there guys recently installed a RPM window switch to my Nitrous system. I am going to detail how i hooked it up and please let me know if its right. RED: to Red on WOT Switch Wire White: to Tach on MSD Ignition Black: to Ground Yellow: to 85 on Nitrous Relay. See the Switch...
  7. Manewaymja2

    Can I Use my MSD 6AL (RPM Pills)to Trigger my WOT Nitrous Switch

    HELP :shrug::shrug:
  8. Manewaymja2

    Mustang Manual 5Speed Gear Box Oil Change / What Oil to Use.

    OVERDRIVE pully what is this and can i just put stock pully back on with say shorter belt?
  9. Manewaymja2

    rookie with a few questions

    As 2000xp8 said the Stock Block is not rated for more than 500 HP at the Fly so going over that will require say a Dart, Boss or any Block that can handle that type of power. For you to be laying down 700 RWHP the Engine HP woul be like say 785 and above i would guess. Windage tray nice Forged...
  10. Manewaymja2

    Another Mustang Idle problem

    I will say i have had these same type of Problems b4 and let me tell you that the Surging idle check list will help you. Help me create the "Surging Idle Checklist" - Mustang Forums at StangNet Go there and see where jrichker was a great help to me and has the surging idle check list, this...
  11. Manewaymja2

    Can I Use my MSD 6AL (RPM Pills)to Trigger my WOT Nitrous Switch

    :shrug:Hey there guys running a 200 Shot Wet Nitrous kit from Cold Fussion and only using a 100 shot right now with proper plugs and retard 2 degress. I dont have a widow switch to activate at 3000rpms as i see sugested allot, so i was wondering if there was any way in which i could wire in the...
  12. Manewaymja2

    Mustang Manual 5Speed Gear Box Oil Change / What Oil to Use.

    Hi there have a 87 Mustang Gt with 5 speed Gear Box Manual and wanted to change oil in it and needed to know what oil do i use? Also do any of you guys think that underdrive pulleys can affect the Charging system on my car? Thanks Matt :shrug::shrug::shrug:
  13. Manewaymja2

    Replaced Alternator / Volts still to Low......

    Do you think i can just have my original Alternator Bumped up to more amps and put that back in ? Also i put the single Wire Alternator in by just cuting the Two big Wires (they come to one on the Conector / Mechanic told me this / Black strip Red) on one of the wire harness from the original...
  14. Manewaymja2

    Replaced Alternator / Volts still to Low......

    Hi there With the original Alternator on my 87 Mustang the car use to show that it charged right about where it should of been untill i changed the Pullies to underdrive and then the V meter on my dash started to show like 10 - 11 and would drop lower when running lights etc. even when i put...
  15. Manewaymja2

    Recomended Plug and Gap size when Using NOS on a 1987 Mustang?

    Any Chance i could Use NGK UR5 (gaped .035) when spraying the 100 shot NOS with 4 degrees Retard?:shrug:
  16. Manewaymja2

    Big Shot NOS Problems. CODES are BAD

    Ok heres where i am at with my 1987 GT Stang. I run NOS on this car and everything was going well when i ran 100 shot with 4 degress retard. I did some other mods to car (Not Engine / its Stock) and today i went to a 150 shot with 5 degrees retard and it seemed as if i now have a few problems...
  17. Manewaymja2

    What size injectors ?

    I run 24lb injectors with calibrated MAF and i spray a 200shot (wet kit) all day long with 7 degrees retard, no problems and car isnt tuned yet.:nice:
  18. Manewaymja2

    Need a Real Good Tuner Tech For My Stang.

    GTOreturns / mc0311grunt Hey Guys just wanted to know have you guys done this before and how good are you, maybe some refrences etc. You can call me 242-393-4958 or email me at [email protected]. Theres just one car for Now. A 1987 GT Mustang Stock Engine with a 200 Shot NOS, MSD...
  19. Manewaymja2

    GT 5.0 Bored .30 Over and Car Built. Whats your HP Guess???

    Anyone heard of a guy named Greg at Speedy Dyno in Owensboro KY. This is where its going and he will be using a SCT Tuner. Anyone have used him before or any good things heard about him??????:nice::nice:
  20. Manewaymja2

    GT 5.0 Bored .30 Over and Car Built. Whats your HP Guess???

    Thanks Guys for all the input, Thanks for helping me geting me on the right track. I will post times etc once tuned.
Top Bottom
Back
Forums
Menu