Search results

  1. nazstang

    Cobra is Missing and Shuttering, Sounds Like a Train!

    Yeah, i filled the tank, so i guess it's gonna be a pain. I threw some drier in it last night and will try tonight, but this is strange. If it's not the gas, what the hell could it be!
  2. nazstang

    Cobra is Missing and Shuttering, Sounds Like a Train!

    No Cel , and it runs like crap right off the back, sometimes stumbling down and turning off. I just don't get how it was fine for 15 miles after the new gas, and then it just went limp :shrug:
  3. nazstang

    Cobra is Missing and Shuttering, Sounds Like a Train!

    This is weird, i got the gas from the same Hess place i've gone to for years.... but, stuff happens. I did notice though that i left the smog hose uncapped(i was quite a few beers deep that day). I did cap it yesterday and it still ran the same, could that be an issue? Yesterday i threw in...
  4. nazstang

    Cobra is Missing and Shuttering, Sounds Like a Train!

    Hey guys, i've got myself a weird situation here. I just finished rebuilding my rearend, and repainting my whole motor, so i had it all torn apart. While apart, i checked the normal stuff like the plugs, gasket surfaces, vac hoses and such, and it was all good. I put here together minus the smog...
  5. nazstang

    Strut tower brace for Cobra intake

    i've got a kenny brown myself, fits like a glove
  6. nazstang

    17 inch wheels

    my P.O.S. is lowered , and even with spacers now, and no problems :)
  7. nazstang

    Throttle Body Size

    .................Just throwing this in. On a pretty stock cobra, 75mm gave me more power through the whole range(especially bottom end), but that was S.O.T.P. testing. I'm barely at WOT, so i can't compare that too well, but there was definitly a boost in "street" driven power. In...
  8. nazstang

    New to Nitrous, where do i go?

    cool, thanks guys. i've already got a fpr, and i think the previous owner put a fuel pump in(not 100% sure, so i'll change it anyways). so basically i should run about 9* timing, get some autolite 24's?, and throw a window switch on there. I'll raise the FP to 43 psi, and 93 octane is all...
  9. nazstang

    New to Nitrous, where do i go?

    New to Nitrous, where do i go now? hey guys, what's up. well i just won and auction for a new zex dry kit (along with the purge kit for 290 :) ) , and am excited to get it in. i'm pretty new to nitrous, and am wondering what to look out for, to expect, and also what i need to keep it safe and...
  10. nazstang

    Cutting Drag Launch springs

    i cut mine a bit(maybe 3\4 coil) and the car hooks up great! (well much better compared to the stocker it had). no bad effect that i can tell
  11. nazstang

    Got RPM II intake! now what Heads?

    so so-far, it seems to be that the afr's and twisted wedge are the top dogs with the edelbrock close behind. gt-40x and holley stuff at the rear? well thanks for the help guys
  12. nazstang

    Got RPM II intake! now what Heads?

    i think your right kevin, the pistons need to be notched. crap! i totally understand Ed. i'm just trying to see what you guys have seen out there, that's proven to work well. My setup as of now is basically a stock longblock with a B-cam right now(i will get a new cam when setup is...
  13. nazstang

    Got RPM II intake! now what Heads?

    thanks alot guys, keep it comming. the afr's would be great, but they are pretty hard to get a deal on. my friend's got TW Rseries, AMAZING power, but too much$$, unless i find used. basically, i would get the heads from the classified's or ebay. i did see some edelbrock performer 2.02...
  14. nazstang

    Got RPM II intake! now what Heads?

    hey guys, i've got myself some research ahead of me, i was hoping for suggestions. i finally got an intake, i just got an Edelbrock Performer RPM II intake (brand new for 1\2 price!), and now i'm on the lookout for what heads i should get to go along with them. aluminum heads are ideal (60 lbs...
  15. nazstang

    Finally fixed the front end clunk!!!

    aaaahhhh, now i got it :)
  16. nazstang

    Can a 306ci create 400rwhp?

    i can be done, you just need to plan it right. one of my closest friends got 420ish to the ground with his 306. no nos or boost, it revs to the moon and got a throttle body you can stuff you head into. i believe he had worked twisted wedge heads and Victor 5.0 intake and edcurtis cam setup...
  17. nazstang

    Power Window issue (not the bushings)

    thanks guys, so the slots that the switch goes in were the problem? that sounds right because i even swapped the driver's side switch(which works) and it didn't do $hit.
  18. nazstang

    Power Window issue (not the bushings)

    hey guys, a while ago my cobra's pass. side window stopped working. it's been in the up position since. today i took it all apart to see what's up, and found out that maybe my issue isn't the bushings. i took the motor apart and the bushings minus well be brand new! not chipped cracked or...
  19. nazstang

    Which exhaust is better?

    i've got a x with my mac catback and it's bananas! i love it, very raspy, not your typical sound. i just swapped an x into my 88 lx, and i think i might want to go back to the H. the sound is so much deeper with the h, it's more "classic" muscle sound. here's a crappy vid of my 94 with the...
  20. nazstang

    Cobra intake and strut tower brace?

    thanks, i appriciate it. i love black and silver, i haven't seen one painted like it yet. the bay looks better now, the smog pump, tensioner, and alt. ar black too, and all the brackets, waterpump and timing cover are all ceramic silver:) new bat and coil too. still got the A\C and PS to go...
Top Bottom
Back
Forums
Menu