Power Window issue (not the bushings)

[nazstang]

hey guys, a while ago my cobra's pass. side window stopped working. it's been in the up position since. today i took it all apart to see what's up, and found out that maybe my issue isn't the bushings. i took the motor apart and the bushings minus well be brand new! not chipped cracked or anything

i hooked the motor up to the switch and when i push up, the motor went on! so i tried down, and nothing happened. so far i've tried cleaning the switch, and i even swapped the switch with a working driver's side. any idea of what's going on? this happen to anyone else when their's stopped working?

thanks

 

[drakesdad]

Same exact symptoms I just had........I found that I have a bad switch...the pass will not work but we pulled the master apart and cleaned the contacts and it goes up and down fine.....I still have to replace the pass side switch but as long as I can get it up and down I can live with it...
Will

 

[FORCED2DV8]

yep same problem , it was the switch, pull the switch make sure you have voltage there..if you do try jumping the contacts, if the window works then your switch is bad, if it still doesnt, it might be the window motor or its jammed in the window assembly

 

[nazstang]

thanks guys, so the slots that the switch goes in were the problem? that sounds right because i even swapped the driver's side switch(which works) and it didn't do $hit.