Search results

  1. doubleomustang

    MAF sensor upgrade

    im wanting to upgrade the throttle body in my 00 GT. im guessing that i need to upgrade the MAF sensor as well. what size MAF and throttle body should i get? do i need larger injectors as well? how does the MAF calibration work with the injectors? Thanks
  2. doubleomustang

    00 GT vs CRX

    AMEN!!!
  3. doubleomustang

    00 GT vs CRX

    i did give info on the rx7 i said its a stock older model before they had turbos
  4. doubleomustang

    00 GT vs CRX

    so do i have an ok chance to get him if hes off the bottle? what can i expect to run in a 1/4 mile with my setup. we only have an 1/8 around here. im not sure what year the rx7 is but its one of the older ones that doesnt have turbo.
  5. doubleomustang

    00 GT vs CRX

    lol ok well good rule and i wouldnt if he wasnt a friend of mine...what do yall think about the rx7
  6. doubleomustang

    00 GT vs CRX

    i have a 00 GT with a 373 rear end pulleys cai and 40series flowmasters. soon to have new x pipe and a sct programmer... a friend that i havent seen in a while has built a crx that is sprayed and pushin 20psi of boost...what kinda race am i looking at here...am i going to get blown outa the...
  7. doubleomustang

    Reseting Speedometer on 2000 GT

    i have run the car against other cars and tho the speedo is off the odometer still reads correctly. just got a ticket...gota get that thing fixed
  8. doubleomustang

    Brake conversion

    i apologize. i took the post wrong. ive been told that ceramic pads dont make a big difference in the braking. what alternative design rotor will help and what do you mean by the way the wheels are torqued on?
  9. doubleomustang

    Brake conversion

    Thanks buddy....any caliper will slow any car down from any speed...think about that... the goal is to do it faster... :Zip2:
  10. doubleomustang

    Brake conversion

    are the cross drilled or slotted not spose to have an advantage over the plain rotors? how are the cobra calipers different from the stock GT?
  11. doubleomustang

    Brake conversion

    so i need 13" rotors that are slotted with cobra or mach calipers. are the calipers going to be much different since they are still double pistons. should i go with slotted or cross drilled rotors?
  12. doubleomustang

    Brake conversion

    so these mach 1 and cobra calipers are triple piston calipers?
  13. doubleomustang

    Reseting Speedometer on 2000 GT

    yeah i found out there isnt a gear to change its all electronic....the odometer is reading right ....
  14. doubleomustang

    Reseting Speedometer on 2000 GT

    i dont think that the odometer is registering more than what is being put on it. is it true then that this year does not have a speedo gear in it.
  15. doubleomustang

    Reseting Speedometer on 2000 GT

    i just had a 3.73 gear installed in my 00 GT. it threw my speedometer off by about 10 mph. the garage that did it said there was no speedo gear to replace. they said that it was electronic and that i needed to find the codes online to reset the speedo....like turning the ignition on and off...
  16. doubleomustang

    Roush Installed Bassani catted X-Pipe...WOW!!!

    yeah that looks just like stock GT pipe
  17. doubleomustang

    How fast have you got your v6?

    Get a GT the model before wont stop until 140 and it still has more. At 140 the rear end starts getting loose.
  18. doubleomustang

    Brake conversion

    thats alot better than i have found them for...are these still only double piston calipers tho...will they be an improvement over stock?
  19. doubleomustang

    Brake conversion

    i was wondering if anyone knows about using rotors and calipers off of a different car on a 2000 GT. Im dirt poor and need a better brake system. eventually i might get something better. so if any one has any ideas about calipers from an expedition or f150. i just need calipers that will fit...
  20. doubleomustang

    Brakes on a 2001 Expedition

    if u can get the old rotors off you can have them cross drilled. or if your replacing them get cross drilled. it will increase stopping power.
View older results
Top Bottom
Back
Forums
Menu