Search results

  1. B

    How to get exhaust work done? Muff Shops say no!

    Appreciate the comments guys, I think I am going to tackle this job myself, my father in law has a mig welder so, time to have some fun...
  2. B

    How far is to far down for 02 Sensors?

    So If I have no cats does this mean I can put it any where?
  3. B

    car running at etremely high temps

    If the top radiator hose is getting pretty hot, then you tstat should be fine. Is it getting hot?
  4. B

    car running at etremely high temps

    If it does not freeze to often and you have sine antifreeze in already you should be fine, especially since you are just toping it off. You just need to let the car cool off enough to take the cap off. Hot cap=bad.
  5. B

    How to weld new O2 sensor Bung?

    Hey guys I have the bung I just not sure how big to drill/cut the whole. I am guessing just a bit smaller hole than the bung.:rolleyes: Let me know though thanks guys
  6. B

    How far is to far down for 02 Sensors?

    By the way I will be tuning this with a tweecer RT. Where I can remove smog stuff and all.
  7. B

    How far is to far down for 02 Sensors?

    I want to move the passenger one before the cat on that side. However, I do not have cats anymore. Does that mean they will not get hot enough?
  8. B

    car running at etremely high temps

    Turn the car on with the radiator cap off (cold start). Let the thermostat cycle and keep filling with 50/50. Be sure to make sure the car is not over heating. Check to make sure there is no coolant in your oil!:flag:
  9. B

    How far is to far down for 02 Sensors?

    Well if it is too far down the I understand that the o2 sensors will not heat up properly to function correctly.
  10. B

    How far is to far down for 02 Sensors?

    Hey guys I need to relocate one of my 02 Sensors to get my exhaust to fit right.:D I am wondering how far is to far down?:shrug: I need to move it about an inch or two down stream. So it is not a drastic change from where they are now, I have plenty of slack in the factory wiring. Comments?
  11. B

    How to get exhaust work done? Muff Shops say no!

    Hey guys, I am in a pickle. :bang: I need some welding done on my exhaust, but no one will touch it because there are no cats on the system. :bs: How am I suppose to get this work done if I do not have a welder. :shrug: This is more annoying than I thought it was gonna be.:notnice:
  12. B

    94/95 Tweecer guys with a cam

    thumpity Thumpity, sig check.
  13. B

    CalCon error message!

    Redo the calibration/payload and write to tweecer to fix this problem, you noob! :lol: :rlaugh: :owned:
  14. B

    Self Tuning Sanity Check! Tweecer RT

    So are you saying we do not have a auto calibration feature? My tweecer say that the throttle is closed when the voltage is at 1.05. IMO, I do not believe .1 V to be crucial on an other wise working TPS System.
  15. B

    Self Tuning Sanity Check! Tweecer RT

    Thanks for the info guys, I just put new tail pipes on my car and will be fixing a major exhaust leak tomorrow. After that I will be checking my O2 sensor, and most likely purchasing a wide band O2 sensor. :) :nice: I guess that means I need a new gauge too. Thanks :SNSign:
  16. B

    Self Tuning Sanity Check! Tweecer RT

    Hey Wes thanks for the info, I have updated my signature, I am not boosted any more, My turbo has been long gone. I was considering getting a wide band but I am not certain if I NEED it right now with the car being N/A. I remember thinking that wide bands were only necessary for forced...
  17. B

    Self Tuning Sanity Check! Tweecer RT

    hey guys I just got my tweecer and will be soon be developing a strategy to do some basic tuning. Before I do this I want to make sure all of my system is in good shape. My tps is reading around 1.05 V at idle with the TB closed. The stop screw is NOT to far open, it is barely opened...
  18. B

    error messages when datalogging in calcon!!!

    ?
  19. B

    CalCon error message!

    Hey guys when i start calcon I am getting an error that says "invalid variant type conversion". Anyone get this before?
  20. B

    error messages when datalogging in calcon!!!

    so what error was it? I am getting an invariant conversion type error. dunno what that means but it wont let me data log.
Top Bottom
Back
Forums
Menu