Search results

  1. 1967project

    Transmission Threads???

    I have a C4 and want to run a cooler. Any idea what size and thread the out and return line threads are on the right side of the tranny? I think it is about a 80's tranny.
  2. 1967project

    67 Guages and Pod Cluster

    Ive got a 67 and have stripped it down to almost nothing. Just the drivers floor pan to go and the master cylinder. I decided to keep the original guage cluster pod, but it needs some serious freshening up. What is the best way to clean it up or strip it without gouging it too bad from sand...
  3. 1967project

    stuck on firing order

    Cam question also I have a 302 block out of a late 80's Mark VII. It is now a 347 with the X303 cam. What would my firing order be? I tried 5.0 and 5.0 HO
  4. 1967project

    How to strip it

    I have gutted and taken off all possible pieces of my 67. Their is some rust through on the trunk floor between where the tank was and the rear valence, also on the rear passenger floor board, about a golf ball size and then the front passenger floor board is rusted, but not through. Their is...
  5. 1967project

    Media Blasting Q's

    So I am at that point to get my 67 media blasted. Do I have to take the doors off and the deck lid too? :shrug:
  6. 1967project

    Which Muffler

    I have a 03, all stock. Which muffler will give me a better sound, but not like a pissed off weed eater? Flowmaster 40? :shrug:
  7. 1967project

    How big is my rear end???

    Ok, I know its a misleading title to some.......:D HA HA HA Serioulsy though, I have a 67 coupe. Any clue as to what the rear end is? my 69 was a 9 inch, but I think this might be smaller.
  8. 1967project

    Which Oil Pan

    I have a 67 coupe with a 347 not in it yet. I plan on doing a mustangs unlimited suspension upgrade, which should not really relocate any of the steering hardware. I was told that I need a front sump pan, but dont really know what brand to go with. Also currently my dip stick feeds into the...
  9. 1967project

    AFR 185's on a 306?

    I have a 347 with a X303 cam. My heads are reworked 351W with the 1.6 and 2.02 valves. How much more could I expect to get out of my engine with AFR 185 heads?
  10. 1967project

    70 Gas tank in a 67

    So I have heard that a 70's gas tank was 5 gallons larger than a 67. Is it possible to stick a 70's gas tank in a 67 without alot of modification?
  11. 1967project

    70 Gas tank in a 67

    So I have heard that a 70's gas tank was 5 gallons larger than a 67. Is it possible to stick a 70's gas tank in a 67 without alot of modification?
  12. 1967project

    front suspension and brakes

    460 Ive put a 460 with C6 into a 69. If you dont upgrade the suspension, you will be very nose heavy, I know cause I didnt upgrade mine. I also had to do the cut and weld on the shock tower. Its not a problem to get the engine in their, but when you want to put on headers (I did shorty's) you...
  13. 1967project

    Good Vendor/ Bad Vendor ???

    Need opinions here. I am looking at all the different vendors for replacement parts like weather stripping, chrome molding, front valences, a hood, monte carlo bar, front suspension upgrade............. Who is good and who isnt? CJ Pony Parts, Mustang Depot, Year 1, The Paddock??? And...
  14. 1967project

    Paint Issues

    In your opinion do how much do you think a satin paint job would run? Exterior and door/ trunk jambs. Engine bay not included. Any recomendations for the Colorado area?
  15. 1967project

    To cheat or not to cheat?

    In all seriousness, turn down nothing but your collar. If your parents are going to pay for it, take it in stride. Im in the process of doing all my own welding and it is going to take me some time to save up for the paint job I want. And as you know, things always come up inbetween that suck...
  16. 1967project

    Help me choose wheels..

    +1 on the Torq Thrust D's. I have the grey center ones. A little bigger than 16's, but they are nice.
  17. 1967project

    Paint Issues

    Has anyone ever done an entire car in a satin paint/ finish? Is it hard to keep clean, not last as long ect.......?:shrug:
  18. 1967project

    Painless Wiring Harness

    I cant seem to find the price, but last time I researched it I thought it was just over 700 bucks. Anyone know what the difference is between the painless #10123 - 12 circuit for a 66-76 mustang hot rod and a #20121 - 14 circuit for a 67-68 mustang is? Im not running anything special.
  19. 1967project

    Transmission

    Thanks
  20. 1967project

    Transmission

    T5 Actually I dont know what type of T5, right now their is no drive train in the car. I have a 347 with C4, but dont really want to put the C4 in it.
Top Bottom
Back
Forums
Menu