Search results

  1. P

    porting stock intake manifold and stock heads?

    I did a home port job on my stock heads and stock lower and upper intake. Those were also my first attept at porting and after doing that it took my old 87 GT Convert from a 14.0 at 97 mph to a 13.6 at 99 mph.
  2. P

    1/4 mile and hp guestimates.?

    I gotta a new car. Its an 88 lx Notch, full interior, its got a spool, 3.73s, 33 spine axels, drag shocks, struts and springs all around, drag lites with 26x10.5 Et.Streets The motor I put in it is a freshly rebuilt 302 About (9.5-1) with Ported/Milled World Product windsor Jr heads ( 1.94...
  3. P

    What size carb should I go with?

    I just got the bottem end of my motor all put together..Its a standard bore 302. Had it honed, all new bearings and rings. Ive got a set of Ported World Products Windsor Jr. heads going on it, An F-303 cam, Victor Jr. Intake, And I was wondering what size carb to go with. I was looking at holley...
  4. P

    How much lift can I use and clear the stock pistons?

    Well I was thinking of going with an F303 or X303.. F is .512 and 288 degrees advertized. And X is .542 and 286 degrees advertized. Would either one of those cams have prodlems with the 1.94 intake valves and stock pistons?
  5. P

    347stroker with gt-40p heads??

    There is no reason to put GT-40Ps on top of a 347. The only place you will see a good gain over a 302 w/GT-40Ps , is bottem end torque. Shell out a few hundred more dollars for some good flowing heads w/ 2.02,1.60s. Also purchasing GT-40P heads then having them porting and putting in larger...
  6. P

    How much lift can I use and clear the stock pistons?

    I have a set of Windsor Jr. heads w (1.94,1.60)s they have been milled just a little bit to true them up, and I was gonna put them over the top of some stock 87 forged pistons and was wondering how much lift I could use before I run into piston/valve clearance problems? Also what would having my...
  7. P

    XXX in the valley of my motor.

    I bet that little bastard porno star is what caused my oil pump to go out in my XXX porno block...
  8. P

    5.0L vs. 5.8L

    the 351w does have more intake bolts. And the intake is wider than the 302s.you can measure from head to head and see which one is bigger..
  9. P

    HELP... B303 with 1.72 RR's and stock Ported Heads?

    It was 400 dollars for everything. But I paid 50 dollars for him to check the heads out and he said that if I had him do the work he would take that 50 out of the cost to fix the heads. So the 350 dollars is for everything. All new intake valves, all new intake valve guides, a couple exhaust...
  10. P

    HELP... B303 with 1.72 RR's and stock Ported Heads?

    I would like to but they are stud mount and my E7's are bolt down.. Would my bolt-down 1.7 RR's be able to even work on the Windsor Jr.s.. I would have to buy new rockers if they wont work. And if I did that I might as well just get 1.6s and use a bigger cam that would have more duration than...
  11. P

    HELP... B303 with 1.72 RR's and stock Ported Heads?

    Well I have a set of dual springs from a set of Windsor Jr. heads that are rated to .560 lift.. Would those springs work on my stock heads and valves? Also the reason I am not using the Windsor Jr. heads yet is because they need alot of work(new intake valves, guides, etc)..
  12. P

    HELP... B303 with 1.72 RR's and stock Ported Heads?

    I got an 87 5.0.. And right now I have the stock cam w/ 1.72s (total valve lift .472) and stock ported heads. The heads have been freshend up a little over a year ago they had the spring heights checked, valves ground, new seals, guides in good shape, new keepers, milled, hot tanked, m-fluxed...
  13. P

    gear drive

    I found a gear drive for sale that says it fits 302/351w Engines. Now does that mean that it fits only the older non roller 302s or will it fit my 87 5.0 HO roller motor?
  14. P

    '89 and up Mustangs came with World Class T-5's?

    My 87 Convertables tranny blew up and I was given a rebuilt tranny and my old one was given to them as a core.. How can I tell if my rebuilt tranny is a "WC" or a pre 89 tranny?
  15. P

    450HP stock Block...Possible?

    I have two buddies with pretty high hp stock 5.0 block Combos. One is a 331 with twisted wedge heads, E-303, Trick flow intake and 11 psi powerdyne. The other is a 347 with fully ported Aftermarket heads (not sure on brand), big Solid Roller Cam, Edlebrock Victor Intake and a 150 hp shot of...
  16. P

    How much will gears help my 60ft?

    I have 3.27 gears and am running 26x10.5 ET.Streets.. With launching at about 4000 rpm my best 60ft is a 1.80.. I will be going to 4.10s here soon.. How much should my 60fts drop from the gear swap and using the same launch rpm? Is it possible to get in the 1.6's ? Thanks
  17. P

    notchback vs 1999 mustang Gt

    He just said that he has a 90 notchback and his boy has a 99 vert. Never mind you changed your post.
  18. P

    notchback vs 1999 mustang Gt

    Yea, I think you gotta chance w a 75 shot. A 99 Gt Vert is a hell of a lot heavier than a notch back.
View older results
Top Bottom
Back
Forums
Menu