Search results

  1. K

    P1445 Code Help please

    well today I cleaned up all three of those grounds again, this time with sandpaper, cleaned the battery cables and posts, cleaned the connections on the purge flow sensor itself, and replaced the fuel filter. I'll let you know if the cel comes back on. Next on the list will be a new sensor...
  2. K

    P1445 Code Help please

    OK, i checked the two grounds to chassis near the battery, the resistance from both of them to the black/white wire on the connector was around 0.9 ohms. I removed the grounds and cleaned them up a bit just to make sure, and had the code cleared, but it will most likely come back on. I bought...
  3. K

    P1445 Code Help please

    i haven't checked ground 104 or 105 yet, but I checked the resistance from that black wire on that connector back to the negative terminal of the battery and got .5 ohms. So the ground going to that connector is fine. But at some point today I guess I'll check those two grounding points and...
  4. K

    P1445 Code Help please

    OK, here are all of my voltage readings...... Engine and Key Off: Red wire - 0volts Purple wire - 0.07 volts Engine Off, Key On: Red Wire - 12.01 volts Purple wire - 4.99 volts Engine On: Red Wire - 13.99 volts...
  5. K

    P1445 Code Help please

    could the sensor be dirty? What would I use to clean it out? All wiring is correct. Ground is strong, no shorts that I can detect. Resistance accross the wires in the sensor is good. Possibly dirty sensor? Does the fact that the code came up twice mean anything? When I had is scanned, the...
  6. K

    P1445 Code Help please

    Ok I checked the resistance between the red and purple wire. I got a reading of 79.6 ohms. The connectors all looked good too. I had my ohms meter set to 200....it doesn't auto range, but I'm pretty sure thats the correct selection to get ohms readings and not kilo-ohms or mega-ohms...thats...
  7. K

    P1445 Code Help please

    1996 mustang gt vert. drop in K&N filter....been in the car since i bought it. Removed snorkel and aftermarket cd player. Other than that, completely stock.
  8. K

    P1445 Code Help please

    yes the car has 103k on the clock. Just bought the car from a used lot so i'm going to replace the fuel filter this weekend. Hope it solves the problem, but what would a dirty fuel filter have to do with the Purge Flow Sensor circuit Input being High?
  9. K

    P1445 Code Help please

    Hey guys. Just the other day my cel came on. I had the code scanned and found the p1445 code in there twice. Not sure why it came up twice. Had it cleared and it came up twice again. I looked the code up and it says the Purge Flow Sensor circuit Input is High. I searched and found that it...
  10. K

    Suspension questions

    has anyone ever used kyb shocks and struts before, or at least heard of someone that has? I'm looking for ride quality and cheap cheap cheap. I wanted to avoid changing springs because the car seems low enough for me right now. Plus with the roads here in RI, I think i'm better off at the...
  11. K

    Suspension questions

    Hey guys. I have a 96 gt convertible and it rides like crap. I know its a sports car and is supposed to have a stiff suspension, but its a little ridiculous. I can feel every little imperfection in the road, and when i go over the big bumps, it feels like the car is going to fall apart...
  12. K

    Cobra supercharger on a GT?

    Would it be possible to throw a stock eaton supercharger from a cobra onto a GT? I'm sure modifications will be needed to get it to fit, but if a bracket was made, and I purchased an aftermarket chip, would it work, or is there something I'm overlooking? Can't afford the KB kit that I would...
  13. K

    Projector headlights on a 96?

    My stock headlights need to be replaced on my 96 gt and I was looking into some projector headlights I found on ebay for about $150. Does anyone have pictures of projectors on a 1994-1998 mustang? I want to see what they would look like on the actual car. I can't tell if it would look good or...
  14. K

    4.6L water pump replacement time and rate

    Thanks for all of the info guys. Brian
  15. K

    4.6L water pump replacement time and rate

    Hey guys, I have to write up an RO (repair order) for replacing a water pump on my 96 mustang gt for school. Can anyone tell me how long it takes to replace a waterpump? If anyone has access to alldata and can send me the hours, that would be great. Or if anyone has an old receipt from a...
  16. K

    Just Sayin Hi

    Hey guys....I just purchased a 1996 mustang gt vert. last week and found this site a few days later. So far I love it....filled with more info than other sites I've been to in the past. I already had a problem with the car, but this site helped me fix that in a few minutes. Well I'm just...
  17. K

    Clutch / Clutch Pedal Problems

    Hey guys, I just had my clutch and throw out bearing replaced by the used car lot I bought the car from, under warrenty. I noticed right away that the pedal was a lot heavier now, and it vibrated a lot, mostly when I wasn't pressing on it. Well after about 40 miles, the pedal suddenly loosened...
View older results
Top Bottom
Back
Forums
Menu