Search results

  1. AnthonyR23

    Final Touches Before 347 Startup Solenoid

    Hey guys, so it feels like the day is here when I can finally get this beast going... but not surprisingly not so much! LOL So everything is back together, I still have to wire my SPAL controller but for now am just going to have it running all the time for the break in period etc. So I...
  2. AnthonyR23

    Injector Install

    Hi, so I installed 30 lbs injectors, first installed them into the fuel rail, they are tight going in, but is it normal that you can see the o ring when looking at the injector bottom that goes into the manifold, looks like they don't fit as tight on the bottom, like they are pushed in, but...
  3. AnthonyR23

    5.0 ticking pretty bad

    I'd guess throw out bearing, transmission related! Had the same problem!
  4. AnthonyR23

    Engine Coolant Temp Sensor ???

    Hi, so I have a trick flow intake, with new fuel rails etc. So the regulator is kinda blocking where the engine coolant temp sensor would go into the coolant tubes that are on the lower intake. If I block that off with a cap, and use one of the temp sensor ports on the intake itself for the...
  5. AnthonyR23

    Air Pump tube dealings... What can I do??

    Hey, I don't mean to highjack this thread, but I have a broken smog tube, and can't really find where I can get a replacement, anyone know where I could find one? Or what the proper name is for this tube, exhaust smog tube, 02 tube?? Thanks
  6. AnthonyR23

    TB Size, 75MM Intake Not 75MM

    Hey, so I just got a street trick flow intake, and it said the intake size was 75mm, but when you measure it, it is more like 70mm, so when buying a tb, should I buy a 70mm, or should I buy a 75mm, will the 75mm tb actually be 70? Thanks Emissions 347, Street Trick Flow Heads, Intake...
  7. AnthonyR23

    Breather, Injector, Mass Air meter Etc.

    Hey, so I have three questions... For a 347 with Trick Flow Street Heads, and TFS Street Intake, Powermax 2030 Cam, would you go with 24lb or 30 lb injectors? Does it really matter, as long as the mass air meter is calibrated right?? And regarding the breather, my engine shop put the oil...
  8. AnthonyR23

    Speedo Question...

    Well maybe since, I already ordered it and the spacer, I could just do something with the breather, so it acts more like a cap, like block it off from the inside or something, cause it's chrome so doesn't look terrible, or maybe I could just swap the valve covers, if they are the same on both...
  9. AnthonyR23

    Speedo Question...

    Ok, awesome, I'll check today!! Another question I have, it's kinda unrelated, I got the trick flow street intake, and because I have a rocker stud girdle, I have the tall trick flow valve covers, all in black, I will throw up some pics after, but the machine shop put the oil fill on the...
  10. AnthonyR23

    Speedo Question...

    Unfortunately I do have the transmission and drive shaft in the car, if I don't do the gear upgrade till next year, will the white 23 tooth driven gear, and a 7 tooth drive gear work ok, other than throwing of the speedo a bit, I am slightly confused about these gears, anyone have any pics or...
  11. AnthonyR23

    Speedo Question...

    Hey so I am working on getting my 347 project together, so I replaced my t5 with another rebuilt t5 but in the process, when I sold my original one, I stupidly sent it with the speedo gear, the cable is still there but I think it will need to be replaced because it looks like the end could be...
  12. AnthonyR23

    Need Help Tonight if Possible... 347 Install.

    so I left the front v of the x on and took off the back part of the x. So it is fine now, I will just make sure I get those full length connectors on asap. Just got the transmission/flywheel/clutch installed, now just have to put the driveshaft up, I need to have 2 hi flow cats welded into my...
  13. AnthonyR23

    Need Help Tonight if Possible... 347 Install.

    Hi, guys, so I dropped my 347 in yesterday, and just got it up on stands, the oil pan is a deep 7qt oil pan and is kinda resting on those cross bars just the corner, which will def. be a problem, because the engine still has to come down more at the back.... anyone know what the proper name...
  14. AnthonyR23

    Crankshaft - Bearing - Transmission?

    Hey, thanks guys, Why do I need 2??
  15. AnthonyR23

    Crankshaft - Bearing - Transmission?

    Hi, so I have my 347 engine home and am slowly getting it back together, they mentioned that I would need a bearing, that goes in the end of the crankshaft, towards the back close to the transmission. Apparently if you get it together without the bearing it will work but will just make noise, I...
  16. AnthonyR23

    Hot Rod - Emissions - 347 - Ontario?

    Hi, so I did a 347 build which is finished, just installed waterpump, and still have to do intake and stuff, but most of it's finished, I was told by someone that I may not have to do an emissions test because of the 347. If I have it classified as a hot rod, anyone know anything about this??
  17. AnthonyR23

    T5 FROM 85 FIREBIRD WILL IT FIT?

    Hi, will a T5 from a 85 firebird fit my 88 mustang, still have my old t5 bellhousing. Thanks
  18. AnthonyR23

    New Transmission Help - 347

    a couple in toronto 1800 for tko 500, 2000 for tko 600
  19. AnthonyR23

    New Transmission Help - 347

    Ya I guess 2000 for a tremec could be do-able, if I search around, any advice on the type of tremec, some say for 94- can any of these be made to fit, or is it better to stick to a tko 500 or tko 600? o.d. .64 or .82?
  20. AnthonyR23

    New Transmission Help - 347

    Hi guys, so it's still pretty cold here in Ontario, but am going to be getting my engine back before the spring, and before I started the engine build was having some transmission difficulties, throw out bearing, etc., so I sold my transmission in the spring. So I would like to get something...
View older results
Top Bottom
Back
Forums
Menu