Search results

  1. B

    why are my times so crappy?

    I went to the track yesterday and ran a dissapointing 14.2 at 98MPH. last year I ran a 13.8 at 101MPH and since then I added 4.10's, Tokico adjustables, H&R SPrings and Nittos and only ran a 14.2. my best 60' was 2.2 what is up? I was expecting atleast a 13.6 it was a cold night and I had...
  2. B

    got a nail in my Nitto, need replacement?

    mine was in the tread in the center of the tire no where near the side wall so thats good
  3. B

    got a nail in my Nitto, need replacement?

    I had my Nitto tire patched because a nail went through it. The tire guy said it will be fine, he patched it from the inside, The tire is new less than 200miles on it. will it be fine or should I get a replacement, its the rear passenger side I dont want to get a replacement its expensive...
  4. B

    Installed Mil's, "check engine" light still on?

    I just installed the Steeda Mil Eliminators there the plug ins, and my check engine light is still on. I disconnected the battery and still didnt go away. what could it be? do I need to reflash the computer or something let me know
  5. B

    Which Plenum: dragon,accufab or C&L

    WHich plenum should I get Im going with a 75MM TB and have good things about the Accufab and it looks nice, but which will produce more numbers?
  6. B

    which SFC: Steeda Full length or MM Full length?

    Which Sub Frame Connectors should I go with the Steeda Full length or the Maximum Motorsport Full lenght SFC? is there a difference?
  7. B

    Are Steeda 3 Bolt Caster Camber plates any good?

    are these CC plates any good? I just want them to compensate for my lowered stang so my tires dont wear uneven. The front is dropped 2.5" up front and rear 1.7" will they have enough to correct my alignment?
  8. B

    my steering wheel is off center and tilted

    thanks guy, I got the alignment and the shaking is gone but the steering wheel is on an angle still, I was looking at my friends and his is on a angle as well not as bad as mine though
  9. B

    my steering wheel is off center and tilted

    I bought it brand new and its never been in a accident, could it be cuzz its lowered 2.5" up front the wheels probably have to be balanced again
  10. B

    do I need Caster Camber Plates?

    I had my car out today and noticed the passenger front wheel is bent outwards from the bottom, will caster camber plates fix this cuzz my tire will wear quickly. my cars been lowered 2.5" from the front I did get an alignment but it only help a bit
  11. B

    my steering wheel is off center and tilted

    I was looking at my steering wheel and it seem that it is tilted towards the driver side door on a angle there is also a bigger gap where the steering column meets the dash, more gap on the right side by 1/2 inch, is this normal or should I get it checked, also the steering wheel shakes at...
  12. B

    alignment without caster camber plates?

    I didnt install the isolators up front so it would drop more
  13. B

    alignment without caster camber plates?

    Will I be able to get my car aligned accurately without Caster Camber plates, its been lowered about 2.5" in the front with H&R SS. right now it pulls to the right real bad
  14. B

    Put 18's on, car shakes at high speeds?

    Is it dangerous to drive then at high speeds?
  15. B

    Put 18's on, car shakes at high speeds?

    no spacers, lugs are right, no rim damage, its just the steering wheel that shakes at higher speeds, so I should get the weights done again? also could it be that I need an alignment, im using H&R supersports without any insulators up front let me know thanks
  16. B

    Put 18's on, car shakes at high speeds?

    I put on 18" saleen wheels and took the car for a ride, It shakes after 60mph and get worse after, I have the weights installed on the inside so they cant be seen. what could be causing this? the shop who installed and mounted the tires said it might shake if there on the inside. should I get...
  17. B

    last month of warranty, what to check out?

    actually my dealership is really good, the service manager knows of my mods and if they arent the cause of defects he will replace them. I have a King Cobra Clutch and he replaced the T.O.B under warranty.
  18. B

    last month of warranty, what to check out?

    I have one more month left of the factory warranty. Im taking the car into to Ford tommorow to get everything checked out and replace what they can under the warranty if needed. what else should I check out? so I can have it replaced for free my car has 30,000KMS
  19. B

    What PSI in Nitto 555?

    What PSI should I be running for the Nitto 555's, on the street for everyday driving? and at the track?
  20. B

    Accufab Tb & Plenum?

    I was thinking of doing the 75MM Accufab TB and the C&L plenum as my next mod, is it worth doing with my existing mods? will I feel a difference? also where is a good place to pick up this combo let me know thanks,
Top Bottom
Back
Forums
Menu