Search results

  1. 5.02GO

    Cooling parts questions........Come on in!

    I dont think that i am having problems with my thermo. It is the second one i have put in this year. Same results too. I guess its possible though. Think i am gonna buy one though. Mr. Gasket 180*. Fan Clutch.....Heavy duty. Whats "police heavy duty?" I am pretty sure mine is bad...
  2. 5.02GO

    Cooling parts questions........Come on in!

    Sup.....I have flushed my cooling system with the prestone cleaner. Little if any crap came out. I assume my block is fairly clean. My car runs hot. It will run hot at idle. While going down the road, it will run about half way on the temp gauge. Yes, its a stock gauge. Okay, i am...
  3. 5.02GO

    *HELP ASAP* Car missing and I'm far from home!

    Check spark gap on plugs? Ummm......vacuum leak? Check connections Spout connector off or missing? Mass air sensor hooked up. Heating elements "clean" inside of meter? O2 sensors? Thats all i can think of now.............Good luck man!
  4. 5.02GO

    347 stroker questions

    Ya know, I too am VERY interested in a stroker. My motor is 12 years old. It has had boost for 9 years. I have searched these threads several times. Its really hard to understand these crazy things. And here's something else. A good machine company that actually produces a QUALITY...
  5. 5.02GO

    clicking smog pump?

    Not sure about the moisture. I run my pump all the time. The hoses arent hooked up to it or anything. I just use it as a pulley basically. I am guessing that the carbon and heat is whats hard on them. If you ever take one apart you are gonna laugh and say........WTH!??! The catching is...
  6. 5.02GO

    Whining transmission

    Rebuilding............Good possibility. Mine did that a year or two ago. I actually had my blower off the car and my friend still thought it was on my car. Thats how loud it was. Anyway, i was building my house when this happend thus i didnt have time to have it rebuilt. I purchased a new...
  7. 5.02GO

    clicking smog pump?

    Your welcome....... I dont remember any suprises if/when you take that pump apart. You may be suprised on how simple and ridiculous on whats in side the pump. Also, it will be full of carbon. Other than that, I cant see you having any issues with the pump.......... enjoy! :nice:
  8. 5.02GO

    CRAPPPP, How can i fix this? Pipe Broke Off In Oil Sender.

    Thats 1/8 or 1/4 NPT. Get some extractors. The type with the reverse threads work the best in my opinion. Good luck man..............
  9. 5.02GO

    Replaced Fuel Pump and Regulator...Survey Says, Still does the same damn thing

    Fuel pump is in backwards! :D btt..........
  10. 5.02GO

    clicking smog pump?

    You could try to just take the belt off completely and start it up. I wont point at the smog but atleast you will know that it is an accesary or not. Now, i have to run a smog because of my blower setup. In the past it (smog) would have a popping noise similar to what you are describing. I...
  11. 5.02GO

    Okay hotshots, explain this....

    Okay, i would agree with the boost thing while going down the road. But setting still in the driveway? Compression. I'll that one too. Well, even though I wasnt running boost in the driveway, maybe excessive air flow? I am running an 8" under/over too. What about that? Thanks...
  12. 5.02GO

    Okay hotshots, explain this....

    Okay, over the past several days my car would fall on its face around 4500 to 5000 rpm. I did this going down the road. I figured it would be boost/fuel related. So when i got into the driveway, i reved it to around 4500 to 5000 and it would hesitate and maybe a little backfiring. I went...
  13. 5.02GO

    Distributors (aftermarket)

    Of corse. It ran just didnt like to idle well at all
  14. 5.02GO

    Backfiring/Hesitation/Powerloss

    Ok, i'm dumb. Whats a cycle test? :shrug:
  15. 5.02GO

    Distributors (aftermarket)

    Anyone use and accel or msd billet distributor? I tried and msd and my motor just would not run right. In fact, I had summit send another one thinking that i might have gotten a bad one. Still didnt run right. This was a while back. I've been looking at the accels.
  16. 5.02GO

    Yet another "flushing Cooling System" thread..

    I purchases some of that prestone cleaning fluid. I am gonna flush it this weekend. Surely that block HAS to be dirty. Its never been flushed.
  17. 5.02GO

    Question about stock Tach

    :stupid: I love sleepers. They rock.
  18. 5.02GO

    gt and lx

    GT's = I like LX's = I like Notches = I like The thing that attracted me to the LX's was this: 1)I just LOVE the stainless steel tailpipes and the upward angle they have. 2)LX 5.0's are far less common than GT's. Notches are even less common. 3)LX 5.0's are a MAJOR...
  19. 5.02GO

    Will performer RPM heads fit on an otherwise stock 302

    I agree with mave...... I have performer five-0's on mine. They are the 190/160's. I think only trick flow has the 202 that will work with stock.
  20. 5.02GO

    Yet another "flushing Cooling System" thread..

    Alright peeps, here it is. I have also searched for this but still not getting a clear picture. My motor is running hotter than normal. I have a NEW 3 row radiator, NEW 160 thermo and I replaced my heater core in February. I have been using the Prestone 50-50 premix crap. My motor is...
View older results
Top Bottom
Back
Forums
Menu