Search results

  1. 9

    Exhaust Advice

    A couple of suggestions Hey Hope, I have done three different exhaust combo's on the 05 and up V6 cars. They have all turned out really good. Here are the combo's that I have used: 1) My wife's 06 Pony package convertible - I purchsed the Flowmaster American Thunder Axle Back kit...
  2. 9

    White Face Gauges and Pony grilles

    Hey Guys, My wife has decided that she wants a set of white faced gauges in her 06 V6 vert. I have not had much luck finding any. Does anybody out there have some on a car and if so, can you show me some pics and let me know where they came from? Also, her car has the my color gauges...
  3. 9

    Rear Upper and Lower Control arm questions

    Hey Guys, I am going to have to replace the rear control arms on my 94 vert. After almost 200K the bushings are toast. I have been looking at them for a couple of weeks. There is a wide range in prices. I am looking closely at the boxed upper's and lower's from LRS. They appear to...
  4. 9

    Need Power Steering Advice

    Hey Guys, I am working on my Father-In-Law's 1970 Mach 1 with him. We have a situation with the steering and I am trying to decide the best course of action to take. The power steering has a dead spot (about 1/4 turn) right in the middle. I had my shop check it out and they took some...
  5. 9

    18" Bullitt wheels on a non GT

    The factory 18 inch bullitts may or may not fit... Hey Mustang 2222, I had the same issue. My wife has an 06 pony package vert and I ran across a set of the Factory Ford polished 18's with tires at a price too good to pass up. Everyone said that they would not fit. I never listen, so...
  6. 9

    Really Quick Wheel Question

    Hey Guys, Will the 18 inch bullitt wheels off of a GT fit a 6cyl? I have a chance to pick up some chrome ones for a GREAT price but I want to make sure that they fit. I seem to remmy reading somewhere that they don't fit. Not sure why that would be. :shrug: Any help would be greatly...
  7. 9

    Seat tilt button

    Hey Guys, For some reason the button at the top of the seat on the passenger side of my wife's 06 vert stopped working yesterday. How does this thing work? Usually I just start unbolting stuff till I find the problem, and that might be what I do in a minute, but I thought that I would...
  8. 9

    How About some Export Taillights?????

    Hey Guys, My wife just purchased a fully loaded Vista Blue 06 pony package convertible to go with her 66 hardtop. What a GREAT car! She loves it and has driven the wheels off of it during the past two weeks she has owned it. My question is about the taillights. I have a 94 Cobra...
  9. 9

    Help with 85 5.0 EFI HO

    Okay Guys, I need to know which is the best way to move forward. I have an 85 McLaren Capri with the dreaded CFI induction on it. It has mostly sat for the past three years because it is not reliable enough to drive. I am trying to decide if I should go Carb (keeps the stock look) or...
  10. 9

    Why won't my wheels fit?

    I may be completely off base but wasn't MS running the full SN95 front conversion (or something similar)? If so, he would not need to run spacers on his wheels becasue the offset would be correct. I remember that he narrowed the wheels for a better fit. Also, isnt a 68 rear about 2 inches...
  11. 9

    Quick Brake Question

    Hey Guys, About a month ago I had a shop put front disks on my wife's 66 coupe. THis was the kit from Master power brakes. When I was under the car last night I noticed that the calipers are on the front side of the rotors instead of the back side. They work great and the bleeders are...
  12. 9

    Got My Pig Dyno Tuned Yesterday! Very Happy!

    Hey Suspect, Yeah, that is them. Nothing but great things to say about em. They have a strong following too. Many cars over there getting worked on. They are VERY nice and down to earth. I probably asked 5 thousand questions and they never got frustrated with me. Owners name is...
  13. 9

    Got My Pig Dyno Tuned Yesterday! Very Happy!

    Hey Guys, The total for the Chip and all of the Dyno pulls was under 400 bucks. This car is an absolute pleasure to drive now! I had considered selling it because of the poor driveability but now it is not going anywhere. The biggest difference came from more fuel and timing. I had...
  14. 9

    Got My Pig Dyno Tuned Yesterday! Very Happy!

    GCom, The idle is pretty decent. Had to bump it up a little to get the cleanest idle possible. I had it at about 800. Sounded great but it would NOT hot idle at all. Now it is about 950. You can still hear the cam but it is not quite as rough any more. It was worth it though...
  15. 9

    Got My Pig Dyno Tuned Yesterday! Very Happy!

    Hey Guys, I just wanted to share my experiences from my Dyno tune yesterday. Just to bring you up to speed, I did the full top end on my car about a year and a half ago. I left the stock bottom end with 159,000 on it (174,000 now). I went with unported gt-40 Y's, 1.6 FMS roller...
  16. 9

    Master cylinder going to cause gray hairs

    Thanks a million Hey Guys, Thanks for all of your replies! That will definitely get me on the road. As for the booster, I purchased a full front disk brake kit, power booster, and dual bowl master cyl from Master Power Brakes. The front disks went on like a champ. The booster and...
  17. 9

    Master cylinder going to cause gray hairs

    Hey Guys, I have decided to go with the manual front disk/rear drum set up for now. There was not any way to get that Master Power Booster and Master Cyl in the car. It simply would not fit. Now I need a dual bowl master for manual Disk/Drum brakes. Is it the 74 Granada master? What...
  18. 9

    BRAKE HELP NEEDED! BIG PROBLEMS!

    Hey Guys, My wife's manual drums finally bit the dust the other day. Unfortunately, it happened while she was driving. The brakes went totally out. Luckily, she remained calm and pony and more importantly my wife are unharmed. Now for the fun part...she said I want power disks on the...
  19. 9

    Oilpressure AutoMeter Phantom doesn't work right ,anyone know how to troubleshooting

    Had a couple of scares with this one Hey Man, I have had the same gauge in my car for 3 years now. I am on my third sending unit. I have had two that I blew out running nitrous and one that read a constant 45 pounds. The first time it happened was after an 1/8th mile run with a 100...
  20. 9

    some r-12 questions

    Hey guys, My wife's 66 coupe's air decided not to work the other day. Since it is 95 plus here she has been relegated back to her saturn. She is not too happy about that. I figure that it is low on freon. I was able to score 3 cans of r-12 and the hoses but the cans say "to use gas...
Top Bottom
Back
Forums
Menu