Search results

  1. MustangMando

    Lifters For A 91 Mustang 5.0

    Thanks, went ahead an replaced them all. Thanks again guys
  2. MustangMando

    Lifters For A 91 Mustang 5.0

    Thanks, for the info
  3. MustangMando

    Lifters For A 91 Mustang 5.0

    I am doing an overhaul on a 91 stock mustang and have a question about part number m-6500-r302 . The old lifters that came out of the car don't sink - the pushrod seat is fixed or doesn't move. The new lifters, if i get a pushrod, i can push the pushrod seat down about 1/4 inch. Please help ...
  4. MustangMando

    Valve Covers Difference On 302

    I noticed valve covers range 1964-1985 and 1986-1995 for a 302. Installing a 1991 302 efi in my 68 fastback and want to know what difference are? Clearance for intake? Guy is selling some cool valve covers, but they are 1964-85. Please any info will help
  5. MustangMando

    Lower Control Arms On A 68

    What i meant where did he buy them from, oreillys, autozone....etc I know the brand is energy suspension, but energy suspension products are sold at autoparts stores WISE ASS.:uzi::p:p:D
  6. MustangMando

    Lower Control Arms On A 68

    Where did you get all the bushings from. That looks really good.
  7. MustangMando

    Lower Control Arms On A 68

    I'm doing a brake swap on my 68 and just removed the spindles to clean and paint them. I have replaced the upper control and ball joint in the recent past, but not the lower control , there is nothing wrong with them as I can see or hear. Should I replace them or just clean them up. The control...
  8. MustangMando

    Headlights Flickered While Driving

    Both are new, I will check connections if not just add relays to headlights . Thanks guys
  9. MustangMando

    Headlights Flickered While Driving

    I thought the headlight switch and the headlight dimmer switch is the same ?
  10. MustangMando

    Headlights Flickered While Driving

    Drove my 68 around for a few minutes and lights seem to turn off and came back on. Then they steadily flickered all the way home. I changed the headlight switch a year ago. I have original wiring and don't have halogen bulbs. Disconnected my electric fan and headlights still flickered. Any ideas?
  11. MustangMando

    289 Oil Pressure Sending Unit Leaks.

    I wouldn't use Teflon tape for anything, not even water lines, in my opinion. Just use the sealant and you should be cool.
  12. MustangMando

    289 Oil Pressure Sending Unit Leaks.

    Loctite 565 Thread sealant
  13. MustangMando

    Electric Fan Vs Clutch Fan Vs Flex Fan On A 68

    I bought a spal and finally connected it right, i am really pleased with it thanks guys. A little loud but so what, just turn up the radio.
  14. MustangMando

    V8 Spindles On A 68

    I am interested in buying a conversion kit, but it states for a 68 v8 spindles. Are there an difference in v8 spindles to a 6 banger. And this is the setup does anybody have any info. Conversion is 450$ and free shipping. Has anyone heard of performance online?
  15. MustangMando

    Need Help With Electric Fan On A 68 Mustang

    I can exchange the alt for a 100amp external regulated, at my local oreillys . What make or model would be a good fit?
  16. MustangMando

    Need Help With Electric Fan On A 68 Mustang

    My instument cluster is dimming too. Should i upgrade my alternator to a bigger one, if so from what make or model(95amp)
  17. MustangMando

    Need Help With Electric Fan On A 68 Mustang

    Installed a Spal electric fan on my 68 mustang and a relay from autozone.I ran fan direct to make sure its not the fan and it woks fine. The fan seems to turn real slow as if it needs more amps? Installed a 75 amp external reglated alternatr and the voltage regulator is getting hot. I followed...
  18. MustangMando

    Oil In My Spark Plug Threads On A 302

    Took out spark plugs after 100 miles of usage and noticed oil on the threads. I bought this car a few years ago and never drove it, since i was restoring it. Took it out for a drive a few times and decided to look at the plugs since the car was running rich. All plugs were black and had oil on...
  19. MustangMando

    Electric Fan Vs Clutch Fan Vs Flex Fan On A 68

    I have 4 1/4 clearance from radiator to my pulley
  20. MustangMando

    Electric Fan Vs Clutch Fan Vs Flex Fan On A 68

    What is a good electric fan that not to pricey? Do i need a shroud?
Top Bottom
Back
Forums
Menu