Search results

  1. stang95silv

    83 mustang parts work on a 87 coupe?

    I'm getting the whole car. I was just making sure the stuff would bolt up.
  2. stang95silv

    83 mustang parts work on a 87 coupe?

    Pretty much can I just unbolt the four bolts in the k-member and drop the whole front susupension including the rack from the 83 and bolt it back up in my 87 as a complete setup. Not to worried about the 4 banger brakes right now just want to get it rolling.
  3. stang95silv

    83 mustang parts work on a 87 coupe?

    So the rack and pinion will work too? Do they have powersteering or is it manual?
  4. stang95silv

    83 mustang parts work on a 87 coupe?

    Will the K-member, a arms, rack and pinion, spindels, brake setup from a 83 mustang v8 hatch work on a 87 mustang v8 coupe? I need front end parts and I found this complete parts car for $150. Let me know Thanks!
  5. stang95silv

    Can EGR be hooked up to Victor intake?

    Interesting. I guess it can be done then. Thanks!
  6. stang95silv

    Can EGR be hooked up to Victor intake?

    I can't delete mine I need it to pass visual inspection. So it can be hooked up?
  7. stang95silv

    Can EGR be hooked up to Victor intake?

    Can an EGR valve be hooked up to the Eddy Victor intake? I've been doing some searching and some say it can't but on summit says it can? I need it to visually pass inspection. Thanks! Brand:Edelbrock Product Line:Edelbrock Victor 5.0 EFI Intake Manifolds Engine Block Style:Stock/OEM...
  8. stang95silv

    Quick Tranny Question

    I pulled a TKO and bellhousing out of a 95 GT and was wondering if I would run into any problems putting it in a 83 GT?
  9. stang95silv

    Powder Coating Intake

    I am going to get my intake powder coated, but I was not sure if I had to use the hi-temp powder or if I could use regular powder. Seems like they only have like black and silver in the hi-temp..... Thanks
  10. stang95silv

    Ignition problem went to start and smoke from engine bay..HELP!

    Does anyone have any pictures? How do I know if they are bad? I have no idea why it did it......
  11. stang95silv

    Ignition problem went to start and smoke from engine bay..HELP!

    I went to start my 93 notch and there was alot of smoke from right around the solenoid under the hood by the battery and all my dash lights went off. The only power I have is the dome light and parking lights. I pulled the ignition module off the steering column and sure enough a YELLOW wire...
  12. stang95silv

    Need help getting keys!!

    I decided today to just take the steering wheel off and pull the whole piece off that holds the ignition since I could not get the cylinder out without a key and without breaking it. And I also popped out the trunk lock and I am going to take them to a locksmith and get him to make me a set of...
  13. stang95silv

    Need help getting keys!!

    We tried pushing a small pointed screw driver in there and pulled and pulled, but nothing since we can not turn the key.
  14. stang95silv

    Need help getting keys!!

    Ford can't cut them. The idea of taking the tumblers out would definately work, but I would buy a set of locks and keys before I made a car that would start with a screw driver. A friend of mine has a set of keys and cylinders but I can not get the cylinder out of the ignition. Please help.
  15. stang95silv

    Need help getting keys!!

    I would have to take it up on a trailer. :rlaugh:
  16. stang95silv

    Where to get a plug for the rear tailshaft of the trans?

    I used a ziplock bag and a rubber band :banana:
  17. stang95silv

    Need help getting keys!!

    Thanks for the replys i'm going to call Ford this morning. If I have to pay a lot for a set of keys I might as well buy a new set of cylinders and keys...Does anyone know how to get the ignition cylinder out without having the key? I pushed the little thing on the bottom but I can't turn it to...
  18. stang95silv

    Got a 93 5.0 LX Notch that was tagged in the front, need input.

    is it worse than this 93 coupe that I just bought? I should have around $1500 in it to fix it. Frame machine time, paint, and a 4 banger hatchback for parts..
  19. stang95silv

    Need help getting keys!!

    Is the ignition key going to be different from the doors and the trunk locks? I know in my 95 the same key does it all.
  20. stang95silv

    Need help getting keys!!

    I just bought a 93 coupe from a local insurance company and they did not have the keys for it. I tried pushing in the little hole at the bottom of the ignition but I do not have a key to turn it to pop the cylinder out. I'm going to call Ford but I highly doubt they can cut a key for a 93...
Top Bottom
Back
Forums
Menu