Search results

  1. Fox_84

    power steering line o-rings

    When I installed my rebuilt rack, I did not use rubber O-rings. I used the teflon washers but the rubber I did not. They do not leak and all seems well. I could not tell that the factory had rubber o-rings at all, this is why I didnt reinstall any.
  2. Fox_84

    Where to buy a bumper cover

    I am wanting a front bumper cover but not some aftermarket crap that doesnt fit well. Does anyone know where I can buy a new front bumper cover that fits nice and could never tell it wasnt factory? Mine is wavy under the headlights and little rough on the under edge, not bad to most, but I...
  3. Fox_84

    DANGER! SCAMMER! WATCHOUT!

    I just wanted to let everyone know that there is a person going by the following names in the Classified Section and is a Scammer!!! 1. Johnson Alfred or Alfred Johnson 2. Tony James 3. Ronald Becker If you see any of these names, BEWARE!! If someone can direct me where to put this...
  4. Fox_84

    THIEF! SCAMMER! WATCHOUT! didnt know where to post this.

    I just wanted to let everyone know that there is a person going by the following names in the Classified Section and is a Scammer!!! 1. Johnson Alfred or Alfred Johnson 2. Tony James 3. Ronald Becker If you see any of these names, BEWARE!! If someone can direct me where to put this...
  5. Fox_84

    Champion Fiberglass Products Hood, what do you think?

    Anymore comments?
  6. Fox_84

    Champion Fiberglass Products Hood, what do you think?

    I am looking to buy a Cobra R hood for my 93 gt. I know Cervinis is the best, but how is the one from Champion Fiberglass Products? Anyone have any advice, opinions, pictures? Also, how good did it line up? Thanks in advance for all the pix.
  7. Fox_84

    Educate me on Rear Axles

    31 spline axles are going to be suggested by just about everyone if you go talking about strength, they are just simply stronger. The more splines, the more strength, 33 splines are even stronger than 31s. If you are wanting to stay with your factory locker (assuming you are still running...
  8. Fox_84

    what kind of springs

    I have the exact same wheels but run 275/40/17 rear and 255/40/17 front and I have Ford C Springs. It will give you that exact look you are describing. C Springs all the way!!!
  9. Fox_84

    13" rotors in the rear...how do these work?

    So I will benefit some from these 13" rotors more than just looks. Right now I have GT rotors. I will benefit more than upgrading to cobra 11.65" rotors? Still looking for anyone with pix. And the brakets that come with this kit wil not flex more than if I went cobra rotors and cobra...
  10. Fox_84

    13" rotors in the rear...how do these work?

    I knew it was mainly for looks but that is part of what I am going for, IF the brakets are strong enough to support the calipers like they need to be. Does anyone have these, and any pix? Do I have to change anything like the anti-moan brakets or just bolt these things up?
  11. Fox_84

    13" rotors in the rear...how do these work?

    http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=140012806148&ih=004&sspagename=STRK%3AMEWA%3AIT I see these on ebay and just wondering if they are any good? It has brakets that relocate 94-04 gt calipers to the correct location to work on 13" rotors. Is anyone running...
  12. Fox_84

    02 GT to Cobra brake conversion...

    bump...
  13. Fox_84

    02 GT to Cobra brake conversion...

    I currently have 02 front and rear calipers on my 93. I am wanting to go with the larger cobra setup. Where is the best place to buy a Baer brake kit and what kit is the best for the money? I dont mind to spend the money, but dont wanna go crazy and not benefit much. Also, what about...
  14. Fox_84

    Rear Wheels Noise (Clicking)

    I had the same exact problem and mine turned out to be the dust sheild had gotten bent up against the rotor. Just a thought, but may be a place to check. Just like someone else said, jack it up and pull the wheel and examine really really close.
  15. Fox_84

    is there a difference between 94-95 and 2002-2004 rack and pinion

    Will I still get the firmness I am looking for out of a 95 mustang rack and pinion?
  16. Fox_84

    is there a difference between 94-95 and 2002-2004 rack and pinion

    anyone???
  17. Fox_84

    is there a difference between 94-95 and 2002-2004 rack and pinion

    I am needing to know if there is a difference between the rack and pinion on a 94-95 and a 2002 rack and pinion? I can get a 95 model r&p for half the price I can get a 2002. They are both remanufactured. I am looking to get the car steering stiff instead of like a cadillac as the 93 steers...
  18. Fox_84

    sn95 steering, what about pump?

    I am using a 2002 rack and pinion, which I understand are all the same from 94-04, correct me if I'm wrong. They are also the same as the 93 except the internals which make it steer stiffer and the tie rod ends. Does this mean I should use new lines for a 93 or a 2002? And for the pump do I...
  19. Fox_84

    sn95 steering, what about pump?

    I am putting a sn95 rack and pinion on a 93. I have sn95 r&p with 93 tie rod ends (inner and outer). This is what I best understand that is needed. I also want to do a new pump and lines while I am at it. Does anyone know if a sn95 pump will work or is better and what about pressure and...
  20. Fox_84

    Modifying E-Brake After disc conversion

    I have a 93 hatch gt and just put 2002 gt disc brakes front and rear. I am now wanting to know about getting my e-brake back in perfect working order. What ebrake cables do I need and do I need to modify the handle? Can you give me part numbers and help with the modifying? Thanks in advance.
Top Bottom
Back
Forums
Menu