Search results

  1. kingc

    Rear seat delete kit

    Where can i get a rear seat delete kit? Can anyone recommend anything here? thanks!
  2. kingc

    Got my car back and numbers

    Okay my car has been out of comission this past week for some install work. I had installed HP's 292 cams (.531 int/ext, tot dur 292, LSA 114), comp valve springs, the heads were ported (stg 3), valve job, replaced the stock valves with ss oversized, new guides, BBK LT's, Pullies, FRPP aluminum...
  3. kingc

    cam overlap and lope/rough idle

    Thanks guys for the info, that's great. I certainly have learned a lot as of recently due NO small part to this message board. It's been a great way to learn. Thanks stan for all the comp cams info. The 292's from HP seem to have a much higher dur than most adv dur on cams i ve been looking...
  4. kingc

    cam overlap and lope/rough idle

    After calculation the overlap on lots of different cams I;m wondering now if my stang is gonna even idle at all, guess that's where the tune will come in~ 64* seems a bit too high. jive am I looking at the right specs for the 292's...
  5. kingc

    Water Temp Gauge Sending unit

    Definently take it off put in viice and then tap it.
  6. kingc

    Water Temp Gauge Sending unit

    oh btw i ended up using a 3/8" tap on the water neck. I actually bought a new water neck just in case I screwed up the stock one when i tapped it for the sending unit. but i didnt need it.
  7. kingc

    Water Temp Gauge Sending unit

    it is pretty easy to use a tap and make a spot on the rear of the water neck that the sending unit will fit in. I had never tapped anything well there a keg once, and well anyway it was a piece of cake. then just run the sening wire any way you would like.
  8. kingc

    Board members in the south TX area

    Ive been to houston performance several times over the six years I ve owned the stang and everytime had good (*knock on wood*) experiences. I think Steve is very knowledgable and a straight shooter. They can get real busy though is the only thing. He has had some great ford mechanics working...
  9. kingc

    cam overlap and lope/rough idle

    Are you visiting anytime soon?
  10. kingc

    cam overlap and lope/rough idle

    Damn i really love that hood Laser. :nice:
  11. kingc

    cam overlap and lope/rough idle

    I dont take that as offensive in any way man, i appreciate your thoughts and input! I can call in the morning, and see where they are on the heads, they may not have gotten to mine yet. To be honest i have never run my car in the 1/4 mile, and honestly i dont want to. I have just loved...
  12. kingc

    Board members in the south TX area

    I am in Houston well Spring to be exact. Spring is about 20 miles north of Houston, i'm real close to the woodlands. Anyway Ive wondered for a long time who is my part of the country. I would love to meet some other mustang owners out there! Please reply if your in this area. C King
  13. kingc

    cam overlap and lope/rough idle

    7 angle valve job, with oversized (1mm over stock) stainless valves, and the heads are being ported stg 3 type port job. They replacing all the parts that wear out over time adding bronze guides, and new springs (comp), chains, etc. and anything else that looks as if it needs replacing.
  14. kingc

    cam overlap and lope/rough idle

    as far as the "exact" specs on the duration, i'm being the told that the total duration is 292.
  15. kingc

    cam overlap and lope/rough idle

    Yes
  16. kingc

    cam overlap and lope/rough idle

    i just calculated what the overlap should be on cams I am having installed i come up with 64* overlap using [(int + ext duration/4) - LSA x 2] for cams with 531* int/ext, total duration 292, lobe separation is 114. I think this might be off? Are these cam specs going to cause a rough idle...
  17. kingc

    Opinions on my current mod combo

    The cam specs are 531' int/ext, total duration 292, lobe separation is 114.
  18. kingc

    Opinions on my current mod combo

    Sorry yes new springs (comp) also not added is valve guides, retainers (bronze), and cam chains.
  19. kingc

    Opinions on my current mod combo

    My car is at Houston Perf now and here is what we are doing: Cusotm Grind cams (comparable to vt stg 2) Head port Valve job Stainless valves (new stainless valves are oversized 1mm) Longtubes O/R H New tune of course Pullies Aluminum driveshaft My last dyno put me at 250 rwhp...
  20. kingc

    Gauge installation question

    I have been trying to figure out how to run the sende wires from the engine bay to the gauge pod. I am installing a oil presure and water temp gauge. I cannot find an easy way to run these wires through the fire wall. Any suggestions... Thanks alot
Top Bottom
Back
Forums
Menu