Opinions on my current mod combo

[kingc]

My car is at Houston Perf now and here is what we are doing:

Cusotm Grind cams (comparable to vt stg 2)
Head port
Valve job
Stainless valves (new stainless valves are oversized 1mm)
Longtubes
O/R H
New tune of course
Pullies
Aluminum driveshaft

My last dyno put me at 250 rwhp and 292 rwtq I hope i can see close to if not at 300 rwhp, but we'll see. I can post some numbers when I get the car back. I wanted to also add a procharger to the list but the bottom end needs to be replaced first in my opinion.

Later...

 

[san~man]

Valve springs? They aren't on the list, but judging by the grind, you'll need them.

 

[kingc]

Sorry yes new springs (comp) also not added is valve guides, retainers (bronze), and cam chains.

 

[02TruBlueGt]

Looks like its going to be one hell of a motor. You should see close to 300rwhp thats my goal also. Whats the specs on the cams?? or are they exactly like vt's. Ill be checking up for some numbers in the future but looks good

 

[kingc]

The cam specs are 531' int/ext, total duration 292, lobe separation is 114.

 

[steveb24]

300 for sure.. and a LOT of torque