Search results

  1. 6Stang7

    trunk seal install

    how do you guys who have done this before suggest i do it? i bought that 3M weatherstripping seal glue (yellow), but that stuff makes a huge mess and gets all over the place.
  2. 6Stang7

    qucik question!

    which side does the furry belt liner go on. outside or inside the glass. edit: i alos have this little bag with a small drill bit and what look to be large staples. what's this for?
  3. 6Stang7

    4 Point Harness

    as mach 1872 said, if you mount them low, they can compress your spin in an accident. this is your safety here, spend the money and either buy or make a roll bar. in fact, track techs shouldnt pass you if your harness is mounted wrong. please take this as some friendly advice. mount your...
  4. 6Stang7

    gas gauge issues

    mine reading around 76ohms empty and about 12-17ohms full. however, when i short the gas sending unit wire to ground, the gauge goes well pass full. :shrug: i guess i'll just buy a new sending unit and hope for the best. anyone have any ideas on this one? i guess the 5 ohms is making that much...
  5. 6Stang7

    gas gauge issues

    so my gas gauge never reads full. so i figured that the float in the tank had a leak or something. pull the sending unit out, and lift the arm all the way up and it still pegs out at about 3/4's of a tank. what gives? anyone know what the maz and min ohm reading on the sending unit should be?
  6. 6Stang7

    fuse panel

    i know there is a fuse panel right above teh gas pedal on the firewall, but i heard, or at least thing that i heard, of another fuse panel. is there one on a 67? if so, where?
  7. 6Stang7

    This is crazy what the $*#@ did I do?

    so you can have it in the acc or on and it wont crank, but if you turn the wipes on it will? sounds like you have a short in the wire itself.
  8. 6Stang7

    Differential broken?

    is this a LSD or a locker.
  9. 6Stang7

    What engine should I build?

    well, you can take all the later model efi stuff off a late modle 5.0 and put it on your 289. swap the cam out to the firing order of the 5.0 though (it's the windsor firing order). you can still use all of your stuff if you do this, same if you do a 347. with the 347, you will need to get your...
  10. 6Stang7

    Big problem! Clutch or driveline, i dont even know

    did you check to make sure your choke is all the way off?? ;) what kind of carb do you have?
  11. 6Stang7

    T5 WC and Non WC question.

    ok, now i am getting conflicting info here. so all 84+ V8 t5's are WC? I know about the alum. barrel on the bearing retainer, which is what my tranny had originally.
  12. 6Stang7

    T5 WC and Non WC question.

    Ok, so i know a world class t5 has a carbon fiber 3rd and 4th blocker ring, but is there anything else that is different? i have been looking for a master rebuild kit for my t5 out of an 87 GT (1352-169). i am assuming mine is not a WC. so, can i take a WC rebuild and use it in a non world...
  13. 6Stang7

    Dual Exhaust 3" Tail Pipes?

    eh, i would go to 3" if i were you. 450+ is well into 3".
  14. 6Stang7

    Dual Exhaust 3" Tail Pipes?

    local muffler shop should have them.
  15. 6Stang7

    flowmaster exhaust system

    13 posts and no one answered his question.:nono: come on people. depending on how fast of a worker you are/ how much of a perfectionist you are, it'll take about 2-4 hours if your car is on jack stands. as for trimming, i cant say because like mustangman70 asked, i donno if you have headers (and...
  16. 6Stang7

    Detroit Locker/T-Lock

    i'd get a LSD for what you want. you're not racing hard core, so there is no real point to getting a locker. if you do decide to get a locker, STAY AWAY FROM THE CHEAP ONES! ones like a Detroit EZ locker.
  17. 6Stang7

    Gears. How hard to DIY swap

    having a professional do it is the best way to go. if have have a dial indicator, and know what to look for on tooth contact, it's farily simple. however, if you dont have the right tools and know what you're looking for, i wouldnt do it. your is going to be harder them mine/most people on the...
  18. 6Stang7

    '05 wheels on '70 fastback

    damn, i thought i'd be doing a first sticky the 05 v6 rims on my car. post some pics once you got them on. :nice:
  19. 6Stang7

    Caroline is up for sale.

    :( You Cant!!!!! :(
  20. 6Stang7

    cowl cover

    anyone have one? does it plug the outside vent on the cowl up so water cant get in? wouldnt that prevent fresh ait getting in/the heater blower motor from not working too well as well as create temp. controlling issues with the heater?
Top Bottom
Back
Forums
Menu