Search results

  1. H

    What size tires for Pony wheels?

    Not sure yet on if I want to go staggered or the same size all around... if I ran the 245's on the back which aspect ratio would look better with 225's up front? 235/45R16's or 245/45R16's would be cool but nobody makes them... so both your cars have the 225/50R16's? BTW which springs &...
  2. H

    What size tires for Pony wheels?

    I picked up a set of 5 lug 16X8" Pony wheels and need tires for them. I see a lot of cars with Ponies looking like they have a lot of sidewall which I don't really like the looks of. I want to run 245/50R16 tires for the added width but I wonder if the sidewalls would look too talk for me. What...
  3. H

    Suggest some brake rotors & pads?

    I'm definitely curious about the ceramic pads... the semi-metallics do seem to make a lot of dust. How gentle are they on rotors (rotors will be slotted)? How are the organic pads in general?
  4. H

    Anyone have pics of their lowered fox?

    That stance looks perfect... are you running any isolators?
  5. H

    Popping front end?

    Could be a loose wheel bearing too.
  6. H

    Anybody using springs from Dynamic Racing?

    Best way to find out... put them on and see how you like them. :D
  7. H

    Anyone have pics of their lowered fox?

    Trying to decide which lowering springs to get and I'm looking for something that lowers 1.5-1.75" up front and slightly less in back. Of course we all know that when the spring manufacturers tell you how much their springs lower it's not always accurate. I basically want no wheel gap in front...
  8. H

    5lug Rear Disc Completed

    Looks great. What springs are you running? Isolators?
  9. H

    Suggest some brake rotors & pads?

    Anyone else have any suggestions? How are the EBC rotors? They have some nice slotted or drilled & slotted ones for a reasonable price. Has anyone tried the Hawk Ceramic pads? They're supposed to be lower dust than the HPS (which I believe is about the same as the EBC Greenstuff).
  10. H

    Tires

    The BFG g-force sports are great in wet and dry conditions. They hook up well and handle excellent.
  11. H

    steering rack replacement

    SN95 rack = more steering effort and better steering feel you'll need some way to adapt the SN95 rack to the Fox steering column (MM hybrid steering shaft or adapt the two somehow); and fox inner & outer tie rods. I believe the lines should be the same.
  12. H

    How to reach DS motor mount nut?

    It's the hard line portion of the p/s lines that's in the way... and they're blocking access to the nut so that I can't get a socket on there... I just realized I may have a unique problem since I have an '04 steering rack in my car... maybe the fox racks angle the lines out of the way. I'll...
  13. H

    94-95 Mass air meter in a fox adapters found

    Spectre is starting to make some pretty decent stuff... I wonder if they read the mustang boards and saw there was a need this kind of adapter? Funny finding it at autozone though...
  14. H

    How to reach DS motor mount nut?

    Quick question, what is the best method for reaching the nut the bolts the driver's side motor mount to the K member? On my car it is almost completely blocked by some power steering hoses where they bolt into the steering rack (I would rather not have to remove these hoses as getting to the...
  15. H

    Suggest some brake rotors & pads?

    Hey all, I have a '90 GT which I am installing a 5 lug conversion on using '94 spindles and '99 calipers. I need to get some brake rotors and new pads to finish off the conversion. Which ones have you guys had good luck with? I definitely want ones that are coated or plated to prevent...
  16. H

    Harmonic balancer????? wobbly????

    The rubber on the stock balancers can crack causing the two sides of the balancer start to come apart, it will look like the balancer is wobbling with the engine running. In my case it looked slightly wobbly and caused minor vibrations at idle, but smoothed out with more RPM. Once I pulled the...
  17. H

    guys that did aerostar driveshaft

    Can someone post the parts numbers for the correct u-joints to use?
  18. H

    SUSPENSION

    Did you replace the spring isolators when you put the new springs in? Also, stock or stock replacement struts and shocks can't really handle the increased spring rate (stiffness) of the Sportlines... I'd upgrade to a good aftermarket set such as Tokico, Koni, or Bilstein...
  19. H

    Stuck cross-pin bolt on axle... how to remove?

    So I went to the junkyard to grab a pair of driver side Ranger axles to use for my 5 lug conversion... With the first axle I grabbed, the bolt holding the cross pin in place came free no problem, but I've tried 2 other trucks and couldn't get that bolt loose on either. I've tried vise-grips...
  20. H

    PBR front Calipers w/ stock rear drums?

    Ok so I'll grab a new MC, which one should I use also taking into account that I will be installing the '99 V6 rear brakes in a few months? '93 Cobra MC?
Top Bottom
Back
Forums
Menu