Search results

  1. stang120gt

    Need pics of north racers rear caliper braket.s

    Well the top pic you have there with the rotor off, is different then mine the caliper mounting point is towards the out side not the inside like yours. So now i get to take evrything apart:mad: yippie not looking foward to that. Thanks for the pics and comments guys :nice: :SNSign:
  2. stang120gt

    Need pics of north racers rear caliper braket.s

    Ok here's my prob i have the fox length axles and the north racers rear caliper brakets. I had my rearend bulit at dts here in MI. My question is when i went to put on my rear rotors, the rotors hit the brakets. So i need pics of what they look like on the car, So i can see if im doing somthing...
  3. stang120gt

    Need help quick spindle & hub ?

    cool thanks guys i really appericate all the help:nice: :SNSign:ers rule
  4. stang120gt

    Need help quick spindle & hub ?

    Well im putting my 5lug front hubs on right now. I have the nut that goes on the out side to tighten the hub down, But i dont remeber if there were any washers or anything that goes on before or after the hub. Before the nut goes on. Please help Thanks
  5. stang120gt

    1pc headlight pics

    HEY NUKKA IT'S GOING TO BE HARD ALINGING THOES IMO :nice:
  6. stang120gt

    Project Plans

    Hey man thats sound like a good plan nug Also this is how you spell (exhaust):lol: :owned:
  7. stang120gt

    Fiberglass front fenders?

    Whats up i was wondering does anyone make fiberglass fenders for our fox bodys. I seen some fenders that were fglass but they were flared out for bigger tires up front. I want stock ones but in fglass Thanks:nice:
  8. stang120gt

    NEED IGNITION HELP ASAP!#

    I just mounted mine the other day. I mounted it on the driver side where the battery went before i relocated it to the trunk. It's clean also a good thing is that i didnt have to run the wire along the fire wall ill post pics later when i get home.
  9. stang120gt

    What is the lentgh of a 94 gt rearend

    Im wondering what the lenght of a stock 94 gt rearend is from axle to axle. Thanks:nice:
  10. stang120gt

    What color should I paint My 91 GT? POLL

    Hey man black out the cowl part of your hood that would look sweet use a semi gloss or flat black :nice:
  11. stang120gt

    Got my rearend in. Pics inside

    Well the rearend housing is a stock fox out of my 92. As for the rest the axles are fox lenght superior 31 spline 5 lug, the brakes are just stock size but cross drilled and slotted rotors and so are the calipers, gears are richmond 373 and the brake pads are hawk hps and to finish it off a...
  12. stang120gt

    Got my rearend in. Pics inside

    Well i just finished up puting the rearend in. I still have to put the calipers and brake lines on, then the rotors. But here's a couple of pics. Also i still have to paint the whole underbody of my car thats my it's dirty. Thats next after i get done welding a crap load of stuff under the...
  13. stang120gt

    crashed today

    I have a hood and im located in mi. pm me
  14. stang120gt

    My Little Shopping Spree(Kinda Long)

    sounds sweet man it's nice spending money on stang. Sounds like you have a pretty good setup there.:SNSign:
  15. stang120gt

    Well i went on shopping spree for the stang last night

    Hey steve what's up. Thanks man for the congrats. I'll see ya monday:nice:
  16. stang120gt

    Well i went on shopping spree for the stang last night

    Sup man the k-member was $325 the control arms were $399 and the spring perches were $42 all this stuff i ordered from 50resto and with this stuff you can keep the springs and struts and you dont have to buy coilovers. :nice: All together shipped to my door was $800.20 :rolleyes:
  17. stang120gt

    Well i went on shopping spree for the stang last night

    Thats the only way to do it:D :lol:
  18. stang120gt

    Well i went on shopping spree for the stang last night

    Well so i found out that i had more money on my cc then i thoguht. So i bought these parts. Ford racing doublehump crossmember, STEEDA, tubular front swaybar, hd rear swaybar, x2 ball joints, bumpsteer kit, end links, Hawk hps brake pads,Kenny brown caster/camber plus kit, kenny brown tall...
  19. stang120gt

    Ever wonder who we all talk to on SN

    Here's me on a occ bike that my brother in laws buddy's friend that hauls the occ bike's all around the u.s. Then there's a pic of my baby before she went in for the winter and all new suspension plus 5lug 4 wheel disk conv.:SNSign:
  20. stang120gt

    Need help front control arm bushing problem.

    col thanks guys
Top Bottom
Back
Forums
Menu