Need pics of north racers rear caliper braket.s

[stang120gt]

Ok here's my prob i have the fox length axles and the north racers rear caliper brakets. I had my rearend bulit at dts here in MI. My question is when i went to put on my rear rotors, the rotors hit the brakets. So i need pics of what they look like on the car, So i can see if im doing somthing wrong or if they put them on backwards.

Thanks

 

[9 Deuce GT]

Ok here's my prob i have the fox length axles and the north racers rear caliper brakets. I had my rearend bulit at dts here in MI. My question is when i went to put on my rear rotors, the rotors hit the brakets. So i need pics of what they look like on the car, So i can see if im doing somthing wrong or if they put them on backwards.

Thanks

Post a pic of yours so we can see also. They should have the angled back piece towards the center on the rearend. How do you have yours?

 

[87ttopstang]

Here are the two pics I have for you. I hope this helps. If you have any more questions, just ask and I may be able to help you out. I did the conversion about 2 months ago. Still fairly fresh in my head.

 

[stang120gt]

Well the top pic you have there with the rotor off, is different then mine the caliper mounting point is towards the out side not the inside like yours.
So now i get to take evrything apart yippie not looking foward to that.

Thanks for the pics and comments guys :SNSign:

Here are the two pics I have for you. I hope this helps. If you have any more questions, just ask and I may be able to help you out. I did the conversion about 2 months ago. Still fairly fresh in my head.

 

[Mustang5L5]

Make sure you swap the brackets to the opposite side as well. You want the caliper to be slightly angled up, not down.