Search results

  1. hotrodt

    5.0 Bronco swap

    I have an '88 bronco w/ the 5.0 in it, I also own a '93 notch with a 2.3. How feasable is it to swap motor, computer and wiring into this notch? I only have 500 in the truck and 1500 in the car otherwise I wouldn't even consider it. The truck runs excellent. Thanks
  2. hotrodt

    Commonly asked ? The answer

    I could not get my turn signals to work on my '93 notch so I immediatly ASS U ME Dah! that it was the blinker, I promptly did what most do, I replaced the hazzard blinker in the fuse panel. Now once I realized that wasn't the problem I asked you guys and the response I got was...
  3. hotrodt

    No turn signals

    Thanks gents for the help. I will get it fingered out, I think it just needs a bigger motor and some nitrous!:SNSign:
  4. hotrodt

    No turn signals

    it's a '93 notch and you guys are correct I replaced the hazard flasher not the ts flasher. Looks like it's time to give peter rabbit a call we going egg hunting! Couldn't be simple NOOOOO...
  5. hotrodt

    No turn signals

    I checked the fuses,all good, replaced the actual blinker and checked all the bulbs and still no signals; no clicking or power to them at all. Besides the obvious like the wiring is @#$%ed is there anything else that would affect this?
  6. hotrodt

    rearend swap?

    swap Thanks much gents you guys save people from making a @#$%load of mistakes!
  7. hotrodt

    rearend swap?

    Will a '96 8.8 fit in a '93 notch?
  8. hotrodt

    Is this car worthy of a Windsor

    I don't want make the mistake of getting rid of the car if it's not necassary. I have pics of the car and the windsor on corral under hodrodt in the members galleries. It's pretty good looking car
  9. hotrodt

    Is this car worthy of a Windsor

    It's a huge let down to put time and money into something and then realize that you made a terrible mistake by buying it in the first place. Hindsight a bitch!
  10. hotrodt

    Is this car worthy of a Windsor

    So here it is, I have a 96 gt and a windsor I have asked some questions about for the last few months.The gt has a rebuilt title as the car has had the same fender squashed twice, the frame was measured with lasers for imperfections in straightness, the frame shop says it's straight. The car has...
  11. hotrodt

    How do I tell what tranny this is?

    You guys aren't like chevy guys at all you actually have some f@#$ing sense.Thanks my friend it definatly has all the earmarks of a t-45.
  12. hotrodt

    How do I tell what tranny this is?

    It's got an old school 5.0 in it, how do I tell what this kid has slapped in this car?
  13. hotrodt

    How do I tell what tranny this is?

    It's in a '96 gt, it's a five speed, it works flawless, the numbers on the left hand side are FGZR 7003 CRES AA M2053 1381 001 20715E The guy I bought the car from said it's a world class t-5, I have my doubts. If this is a wc t-5 how much power will it handle? any help...
  14. hotrodt

    Charging issue's

    Pics are up please help thanks. I probably should yank this troublesome 302 and put the 360 in
  15. hotrodt

    Charging issue's

    Pics The alternator has these numbers on it 15V 60A D87F 10300B. The car has a MSD Digital 6 programable ignition on it w/ the magnetically triggered dizzy and 8.8 MSD wires and Matching MSD coil. I have wired this particular ignition twice now on two different vehicles with no problems, the...
  16. hotrodt

    Charging issue's

    ]I have a '96 GT w/ a old school 302 The alternator has 1 large red wire running to what seems to be the hot on a fuse box in the engine compartment, the other wire is grounded to the motor and there is also a stud on the right side of the alternator that has nothing on it. I have a red top...
  17. hotrodt

    Popping through carb

    Thanks gentlemen
  18. hotrodt

    Popping through carb

    I have 302 that ran fine with a two barrel but since I converted to a four barrel it won't run worth crap.I put a holley on first and it kept catching on fire inside the carb every time it would pop. Next I put a brand new edelbrock 600cfm on it and now it doesnt catch fire it just consantly...
  19. hotrodt

    FPS built 360ci.

    Screwed I agree fellas the only way to tell for sure about those rods is to disassemble the motor and see where the craps at. I am very embarrassed about the whole ordeal to be quite frank. I had Diamond Research and Development build a 434 sbc( Can I Say sbc on here?)the build was $14,889...
  20. hotrodt

    FPS built 360ci.

    360ci. Well full auto you have definatly confirmed that you have experience with FPS, Troy is who I dealt with as well,very,very dissapointing! I know the crank is indeed a Sonny Bryant pc. It's got the name and stroke on the first throw but as far as the rods I only have the receipt...
Top Bottom
Back
Forums
Menu