Search results

  1. StangLou

    CLEAN PURGE CANISTER

    Right next to the blinker fluid.
  2. StangLou

    Oil Sep Install...

    Honestly I can not find anywhere on the insert what kind of filter it is. The insert shows a complete breakdown of the Pneumatic Air Filter, but it does not state exactly what the filter is. It simple states it as an element that acts as a particulate filter and absorber. It does state it can...
  3. StangLou

    Oil Sep Install...

    Im actually doing a write up for this install, and my Cobra upper/lower install. After Im finished with them Ill pm a mod or 2 to see if I could get them put up as tech articles. Figured Ive been on this site since '02 I think, I can give something back. There is a tech article on doing...
  4. StangLou

    Oil Sep Install...

    Well after a couple of days of tinkering here is the finished product. Since my upper/lower intake install I have had issues with oil basically flooding the upper from my pcv, and it covering the back 2 plugs with oil. Im talking about having to add half a quart or so every 500 mile bad...
  5. StangLou

    lower intake leaking oil

    I had heard not to use those little rubber front and rear gaskets they give you, but I slapped some rtv sealer on them, put them in place and havent had a problem with any type of oil leak from the lower. If you dont care about a little oil leaking out, then I wouldnt see there being to big...
  6. StangLou

    Where in the heck does this line go???

    :nice: awesome, thanks guys! I figured that was a coolant line space like what was on the egr spacer on the stock upper. Thanks again! :cheers:
  7. StangLou

    Where in the heck does this line go???

    I have an aftermarket Cobra Intake on mine, but I will still hunt and see if that port is there. Any ideas on if there is a difference in the lowers on the Cobra intakes vs stocks? Thanks for the help guys!
  8. StangLou

    Where in the heck does this line go???

    Thanks guys, Ill try and hunt down that spot after work today, or early tomorrow am. :nice:
  9. StangLou

    Where in the heck does this line go???

    For some reason I can not find an answer in my Chilton or Haynes Manual as to where this line goes... Anyone know for sure where this thing is supposed to go to? The line starts on the left side. It comes out of the purge solnoid on the charcoal canister, and has about 2 ft of line to it...
  10. StangLou

    Oil pressure Sending unit questions

    I had a similar issue with my '90. On a cold start, the oil pressure would be halfway b/t the white line above the mid line. After about 20 misn of driving the oil pressure would drop to midline. At a stop it would drop to the line under the midline. I changed the oil pressure sending unit...
  11. StangLou

    1993 Mustang Gt questions

    Ford would/should not have put SVT decals on a '93 GT. The bad thing is there are a lot of easy ways for people to get these emblems and sale GT's as Cobras. If your really curious, Im sure any of the SVT sites should be able to track a VIN to see if it matches up.
  12. StangLou

    Any brake upgrade suggestoins?

    I would like to upgrade the brakes on my LX. Ive started tinkering with the engine and suspension, so I need to make sure it can stop in time. What can I do to improve braking without breaking the bank. Surely there are some big name companies that make good rotors/calipers/pads without me...
  13. StangLou

    How do you probe a wire with a voltmeter?

    x2 Just be sure you get through the insulation, especially when checking things like TPS voltage. That is some killer insulation they put in those harnesses.
  14. StangLou

    tubuler k-member vs. stock lightweight?

    If you dial your suspension in right, you dont have to worry about wheelies unless you just want to do them. My shops car runs sub 8.90's and has the UPR k member/coilover kit. The car just hooks up and goes, the nose just barely eases up off the ground. I put the same UPR kit (K...
  15. StangLou

    yellow headlights

    MAN THOSE ONE PIECES LOOK NICE!!! Might be getting a set of those soon, g/f says the Fox needs new lights lol. What did those set you back, and can you get them from anywhere besides ebay?
  16. StangLou

    Compression results...

    Thats my guess, especially since its the rear cylinders. Im guessing the pvc is just sucking it up and its wetting those plugs. Is there anything I can do to stop this? I didnt man. I figured they were "low" since it was on a stone cold engine, I didnt feel like getting 3rd degree burns...
  17. StangLou

    Compression results...

    Well I decided to do a little tinkering with the car today and wanted to check a few things. Ive been having some bluish smoke come out the tailpipes and wanted to check compression. I did this on a cold engine because those L/T's get HOT, but I know its not best for the results... Cylinder...
  18. StangLou

    Couple of Code questions...

    Thanks man, good info :nice: . Ill check that resistance and see what its sitting at.
  19. StangLou

    Couple of Code questions...

    Pulled some codes to try and find what might be causing my Check Engine light to keep coming on. Every day after about 15-20mins of driving it will turn on. After the light comes on I can notice a bit of a stumble at idle, and it starts to smell a little rich. The codes I got are as...
  20. StangLou

    oil type ?

    x 2 Most synthetics say you can push 6-8000 out of them. I would never push a filter that far though. I am personally anal about my oil lol. I use a full syn on the '03, and still change it every 4000 at the most. The 5.0 has 10w40 in her, and is changed every 3000 miles along with the...
Top Bottom
Back
Forums
Menu