Search results

  1. M

    HDMI vs. Componet Video, noticeable difference?

    I just bought a 40 inch LCD Samsung thats 720p. Now my dvd player is progressive and can adjust up to 1080p. Right now cause I'm using componet I can't set it higher than 480p. So If I buy the HDMI cable so I can get 720p Is it gonna be worth it, will there be a noticeable difference. Thanks...
  2. M

    Idle speed won't go below 1500 while moving

    I'm kind of having the same problem. My idle sticks at 1200 rpms when slowly moving but wot and sitting idle or normal. You removing the maf screen is ok. Thats not gonna cause a problem. Your car should not be idling at 1000 thats way to high. GT's should idle between 700-900 rpms. Mine...
  3. M

    upr upper control arms broke.

    For drag racing with a little extra noise. Metco upper and lower control arms. The bets money can buy. I think about $600 to $700 for all four.
  4. M

    Need brand of CAI that fits 75mm Throttle Body ASAP

    To answer you guys question. No the stock cai won't fit the 75mm throttle body. If you do or want to try to make it fit. You can try to hollow out the end that goes to the tb but I eventually cut through the piece and it was gonna leak. Josh
  5. M

    TPS won't go past .96

    I had to adjust the TPS cause I installed a accufab throttle body and plenum. And accufab says the tps needs to be adjusted to .98 to 1.00 volts with the key turned on. It was reading .86 before i adjusted it, but I can't get it higher than .96, I don't know if the .02 to .04 difference really...
  6. M

    TPS won't go past .96

    i tried adjusting my tps sensor to .98 to 1.00 but it wont go past .96 . So do I need a new tps. Haven't ran the car yet battery is disconnected as we speak. Thanks Josh
  7. M

    Installing a X-pipe tomorrow...?

    I would get a buddy to help you with it. It will be so much easier. A couple jacks will help in keeping your catback in place when you unbolt the factory h-pipe. Just put them under your mufflers when you have the car on jack stands. Josh
  8. M

    Need brand of CAI that fits 75mm Throttle Body ASAP

    I got the roush tb to maf with a coupling i bought at lowes and a old densecharger (demolet) maf to air filter right now. I cant use the rest of the roush cause the coupling is to long and the roush pieces arent flexible. So I'm gonna go with demolet soon. Josh
  9. M

    RPM question after tb and plenum install

    I really don't see how the iac can be installed wrong, heres a pic
  10. M

    Need brand of CAI that fits 75mm Throttle Body ASAP

    My factory cai and the roush cai don't fit the 75mm tb. I tried cutting on the factory tb to maf tube but its to cut up to use anymore. I need a aftermarket brand thats worth while that fits 75mm tb or comes with the 2 couplings 70mm and 75mm. And doesn't use factory mounting crap to the...
  11. M

    Any tips/tricks to make sure air is out of the cooling system

    Thanks appreciate it. Josh
  12. M

    RPM question after tb and plenum install

    I just installed the accufab plenum and 75mm tb on my 03 gt. I let the car idle for about 5 minutes and than drove it home about 2 miles. I didn't reset the battery. But my rpms hang a little when I'm slowing down. Hang at like 1200-1300 and than when i come to a complete stop it drops to 700...
  13. M

    Any tips/tricks to make sure air is out of the cooling system

    Just wondering if theres any tips or tricks to insure all air is out of the cooling system. Thanks Josh
  14. M

    What is that sound...??

    Mine a few back had the same noise. But wasnt hitting the axles. It was hitting the frame. A piece of my pipe was sitting about 1/4 from part of the frame and that was the problem. Josh
  15. M

    Lower Control Arms....

    I agree call Steeda. There techs usually have good knowledge on mustangs inside and out. I returned a part and the tech i spoke with actually put the same part on a test car and tried it out to see if it was faulty or not. And called me back personally.
  16. M

    Wheres the obd II port. I need to plug in my xcal

    Thanks, Its dark now so I'll wait til the morning.
  17. M

    Wheres the obd II port. I need to plug in my xcal

    Dumb question but wheres the obd II port of my 03 gt. I need to plug in my xcal2 . I've never messed with the port on this car so have no idea where it is. Thanks Josh
  18. M

    Stewart Performance water pump vs. factory, pics inside

    Install was pretty much straight forward. Pull the water pump pulley off and and four bolts on the water pump. It was a pain in the ass to break away from the blockthough. I guess after 4 years being on there, it was stuck pretty good. Had to use a thin bladed craftsman screwdriver to and pry in...
  19. M

    Stewart Performance water pump vs. factory, pics inside

    I just installed the Stewart EMP Performance water pump from Steeda today on gt. $149 for the pump. Pics below. New pump is on the right. The blades are about twice the length than stock.
  20. M

    Tech somewhere told me 87-93 shocks dont work on our cars

    Found this in a thread just a minute ago STRAIGHT from Maximum motorsports: "There should not be a big debate over which year dampers to use. 1994+ rear shocks are recommended in all 1979-2004 (solid axle) Mustangs because they offer a reduction of excessive droop travel and a slight...
Top Bottom
Back
Forums
Menu