Search results

  1. bretamo

    Caught The Drip and Need Help

    I wish 5 days of penicillian would solve this drip, but I am afraid it won't. There are questions near the end of this post I hope you can help with. My current situation is that I found water/coolant in the oil pan and a little steam/water dripping from the exhaust after a head, intake, and...
  2. bretamo

    Photo Request: Lower Intake RTV Application

    I am writing to request a photo of how RTV was applied for a lower intake install. There is a posting out there somewhere that has the most perfect photo of how RTV can be applied around a lower intake gasket, but I cannot seem to re-discover it in my searches. So any help in finding the...
  3. bretamo

    What Would You Do????

    The drop right in on the passenger side, but not on the driver side.
  4. bretamo

    What Would You Do????

    Hello Experienced Members - I recently bought Y303 GT-40 heads from www.blueovalindustries, and they arrived with two unique/differing bolt hole sizes. This is causing a problem when I try to use the ARP Bolt kit (154-3705), which have the washer-bushings that fill the inside of the bolt...
  5. bretamo

    KSR Underdrive Pulleys

    I purchased some nice looking KSR underdrive pulleys from blueovalindustries.com and am wondering they sent the right ones for a 92 Fox. The size pulleys do not look in the same proportion as the traditional photos I see of them. Both the altenator and water pump pulleys are about two...
  6. bretamo

    Pushrod question

    I would like to bump this thread - are stock pushrods okay to use with guideplates, or should you get new ones. If new ones, then what length is the stock pushrod so I know what to order? Thanks
  7. bretamo

    Request for Roller Rocker Stud Part Number (ARP)

    Thank you!
  8. bretamo

    Anyone drilled/tapped Heads for Stud Mount Roller Rockers?????

    Thanks for the responses - I'm leaning toward taking that "if you had to ask, don't do it" advice, since you'll see in another thread that I and ARP-Bolts is not sure which rocker studs to use for this goal. I need to get this project done in a week. More news at 11:00.
  9. bretamo

    Request for Roller Rocker Stud Part Number (ARP)

    One last bump - hoping someone has done this and can share the part numbers for the studs used.
  10. bretamo

    Anyone drilled/tapped Heads for Stud Mount Roller Rockers?????

    Has anyone drilled and tapped Ford Racing GT-40 heads for Roller Rocker Studs? If so, what do you need and how do you intelligently approach and advise a machine shop? (Do I need the roller rockers and studs on hand?) Thanks for any help.
  11. bretamo

    Request for Roller Rocker Stud Part Number (ARP)

    Bump - (need to order real soon!)
  12. bretamo

    Request for Roller Rocker Stud Part Number (ARP)

    Hello, I am writing to request help in identifying the proper ARP roller rocker stud kit for a GT-40 M-6049-y303 aluminum heads. I know these heads are made for pedestal mount roller rockers, but I plan to find a machine shop to drill and tap for roller rocker studs. The plan is to...
  13. bretamo

    If you could buy any car in the world...

    "It's got a cop motor, a four hundred and forty cubic inch plant, it's got cop tires, cop suspension, cop shocks, it was a model made before catalytic converters so it'll run good on regular gas," says Elwood Blues.
  14. bretamo

    Does Anyone Have this Magazine (girls)?

    Okay, it was wrong of me to put the word "girls" in this post, but I need your attention and help. I am looking to buy the following magazine from anyone who might have it and like to part with it. I'll even borrow or rent it if you want it back. There are no more back issues available, that...
  15. bretamo

    Best Place to Buy???

    The price was right for 89White50. I sent him $10 for his help (he won the challenge for providing a link for the heads, even though there was no real competition from others). Based on the feedback in this thread, the folks in the stangnet.com community appear to always pay suggested retail...
  16. bretamo

    Some cool pics I took...

    If your camera has the option, go to aperture mode and choose an aperture of F15 to F20+ and put the camera on a tripod or something to keep it real still. This will allow the items in the distance to be in focus on a close up shot.
  17. bretamo

    Best Place to Buy???

    Gentlemen - Many of you have done things with your cars that I can only dream of doing, and that is why I respect this forum. I bet each of you had a goal and created a plan and budget to get to your end result. I have done the same thing, and the plan is to find these specific items at the...
  18. bretamo

    Best Place to Buy???

    Thanks for the positive responses - but this is not going the way I expected because I failed to indicate that I am looking for the "exact parts that are new from a company" rather than "used items or alternatives from an individual on ebay". I bet someone out there has recently experienced...
  19. bretamo

    Best Place to Buy???

    That was the easy answer.... Ebay is the easy answer - any companies you recommend for the lowest price?
  20. bretamo

    Best Place to Buy???

    Hello folks - I'm looking for the best place to buy Ford Racing GT-40 Heads and Intake at the lowest price. I'm internet savvy and have searched around, and I also get a few Mustang magazines that provide many many places to buy at an average price of $600 and $1000 for the intake and heads...
Top Bottom
Back
Forums
Menu