Search results

  1. craigwhite89gt

    MSD 6al install

    anyone have a good page for installing a msd on a 89 gt.... Im slowly tryin to figure out how to do it by the diagram...With a blaster coil
  2. craigwhite89gt

    Installing fuel pump, Reg., MSD Need tuning tips

    come on people...i know someone knows something...I figured id jus put some auto lite plugs in at .060 .60 what ever gap it is ... i got the fuel pump and regulator done... about to start msd wiring now
  3. craigwhite89gt

    Installing fuel pump, Reg., MSD Need tuning tips

    Im putting in a 255 pump 2day, adjustable regulator, and MSD with blaster coil. Right now im wondering if i should go get some new plugs and what i should gap them at? Also with the MSD on how much pressure should i run from the pump. Some of my other mods that come into effect with tuning...
  4. craigwhite89gt

    Weird problem Hessitating....

    ttt
  5. craigwhite89gt

    Weird problem Hessitating....

    Ok after i ran my car for a few mins today i hit the gas and at about 2500 rpm i am having a hessitation for a second then the car picks up, then it may do it again.. This has been goin on for the past 3 days. I pulled the plugs out and they have a white chalky look to them, i belive that...
  6. craigwhite89gt

    ignition/altenator question

    im jus gonna go with a 130 and get the pain over with
  7. craigwhite89gt

    ignition/altenator question

    well i do belive that its losing quite a bit of power at idle, due to the fact the lights dim a bit and if i have heat on high u can here the fan speed up once i hit the gas. The car has 166,000 on it and i still have right to belive the altenator is eithier original or real old replacement...
  8. craigwhite89gt

    ignition/altenator question

    First off here are my mods. Intake--Trick Flow Street Intake manifold--70mm TB--24lb inj--headers--X pipe-- exhaust-- AC Delete bypass smog pump-- 70mm mass air-- Now my questions are i jus got a MSD6al, And i need to order a coil, and i want to order the MSD dist. But my question is...
  9. craigwhite89gt

    Stalling problem after put on mods...

    TTT
  10. craigwhite89gt

    Looking for F Cam comments

    I recently got a Shortblock 302 With a F Cam already in it, I was wondering what you might have to say about this cam, and what heads you would run with it if it is any good, the guy i got it from said he likes the F cam best so im looking for other opinions, and also what rockers 1.6? 1.7...
  11. craigwhite89gt

    Stalling problem after put on mods...

    After i put on my Trick flow street intake & 24lb injectors and mass air sensor, sometimes lets say im coming to a stop and im at 3,000rpm and i push in the clutch the car acts like its about to stall (rpms go down about all the way and my AMP light comes on for a quick second) and pop back...
  12. craigwhite89gt

    5.0 engine know it all's check this motor out....

    thanks for the reply
  13. craigwhite89gt

    5.0 engine know it all's check this motor out....

    http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33615&item=2460988418#PAYMENT%20AND%20SHIPPING%20INFO I need a new motor and came across this guy. Let me know what you think of this setup, parts, price. And also what kind of intake manifold and injectors should i run...
  14. craigwhite89gt

    tested car with cooling system analyzer ---have question though

    I tested my car today to see what the deal was with my overheating problem was... and the results were.... If the pressure gauge pulls vacuum that means u have a crack across the intake seat of the cylinder head.. Now my question is does this mean that the cylinder head is cracked or just head...
  15. craigwhite89gt

    weird overheating problem

    Thanks for the replys, ill check it out tommarow.
  16. craigwhite89gt

    weird overheating problem

    A week ago my car overheated for the first time since i got it, so i changed the thermostat with my dad. He said we should keep the cap off the radiatior to see if the fluid is circulating. Well after the car started to get to normal temp the fluid started gushing out, something he said...
  17. craigwhite89gt

    Whole bunch of questions, exhaust, lowering springs ect... please look

    ttt--
  18. craigwhite89gt

    Whole bunch of questions, exhaust, lowering springs ect... please look

    thanks for the pic with the pro-kit thats about what im looking for but anyone else please feel free to post what you have.
  19. craigwhite89gt

    Whole bunch of questions, exhaust, lowering springs ect... please look

    Hi, i recently bought a white 89 GT 5 speed, it has 153,000 and the topend has been rebuilt supposivly 10k ago. Now i have started buy parts LOTS of em. first let me tell u my parts list. Stuff already on the car Cold air intake some kind of h pipe with cats and a cheap exhaust with...
View older results
Top Bottom
Back
Forums
Menu