Search results

  1. S

    500rwhp how-to write-up w/ sq-trim

    man i started this post a long time ago well some up date on the car jpc performance has it working there magic and cleaning up all the wrong i did lol... like all the bolts and stuff i forgot to put back on the motor when i put it together........ anyways the car is up and running theres...
  2. S

    my project is in trouble help

    thats on the tranny side and its 10
  3. S

    my project is in trouble help

    i am will to try anything at this point i was thinking of just getting a new clutch ..... but i cant see the clutch being the problem as long as the flywheel is the rigth size ( thats 10.5" for the t-45) then the bolt pattern should not have any effect
  4. S

    my project is in trouble help

    the tranny is a t-45 the clutch is a spec stg1 and the flywheel is stock i am using the stock cable for the clutch --------- on the old motor the stock motor i got from mmr i had a 6-bolt alum flywheel and the spec stg1 clutch it worked fine on this new motor i had to replace the...
  5. S

    my project is in trouble help

    the transmission guy is saying its like the flywheel is setting out to far maybe 1/4 or so and when every thing is bolted up the fork will not move almost like its binding or some thing and the car is in neutral clutch will not engage so he wants to see the old 6bolt flywheel to see if its...
  6. S

    my project is in trouble help

    well i am at the point were i am just tring to get the car back on the road its been down since aug. of last year....:( last year :mad: i just want to get the cams properly degreed and break the motor in with a safe tune i got the cobra fuel tank and pumps in my basement will be getting...
  7. S

    my project is in trouble help

    need a little help guys i dont want to sell it but i will if i cant see an end to all the money i am dropping in this thing anyways i got the mmr900 shortblock in the car . the guy that put the motor in said he was having trouble getting the clutch to engaged after he reconnected the...
  8. S

    fuel options for forced induction

    also once i can get this tranny thing fixed i will then drop the car off to jpc performance to have the cams degreed and the car tuned i will have : mph blower cams patriot stg2 heads mmr900 shortblock sq-trim vortech 3.60 pulley stock fuel tank with svt focus pump...
  9. S

    fuel options for forced induction

    ok -8an line from the tank to the rails got it. thxs ok sounds like i should be good on fuel up to about 500-550 rwhp just with the cobra fuel tank,stock pumps and bap i will check with the transmission shop on the pilot bearing ......
  10. S

    fuel options for forced induction

    need help mmr900 and t45 tranny connction. ok guys i got the mmr900 motor in the car guy that dropped the motor in for me after i put the motor together said he can't get the clutch to engage ...... i dropped the car off to aacom transmission shop they are telling me the same thing that...
  11. S

    fuel options for forced induction

    hey guys can anyone give me stats on fuel options for a boosted gt i want to keep the car returnless but i also want to make about 600whp i just picked up a 03 cobra fuel tank and dual stock pumps for 600 off ebay what is the max i can get out of this before i need a boost a pump or...
  12. S

    K member

    i just installed my mmr k-member with a-arms,cambers and new struts and all i can say is man i got a lot of room now to get at the starter,headers and oil pan........ also i can hold the k-member in one hand with 2 fingers try doing that with the stock k-member and i think dropping almost...
  13. S

    whats needed to go blow-throught sq-trim

    also if anyone can fill me in on were the hoses are connected when going from suck to blow througth i know on suck througth when the maf is at the beginning the hoses connect before the blower
  14. S

    whats needed to go blow-throught sq-trim

    ok cool thats was i was thinking just wanted to hear it from one of you guys to be sure i am also looking at a wastegate and the smallest pulley i can get for the sq-trim wastegate will be set to say 15psi and anything over that will be purged from the wastegate this should help to give...
  15. S

    whats needed to go blow-throught sq-trim

    ok guys almost got the motor back in the car my question is what all do i need to covert from draw-throught to a blow-throught set-up i have the mph mongoose kit (sq-trim vortech,42lb injector) i ups just dropped off the cobra fuel tank w/pumps off today whats the max hp i can get out...
  16. S

    still working on 500rwhp car need help

    yes this is what i was looking for thxs man......after reading this i think i can get this done...:D
  17. S

    still working on 500rwhp car need help

    will wish me luck going to try and pull the motor in the morning hehe in my driveway more like in the street in from of my house the new motor is a mmr900 shortblock (8.9cr),mph blower cams and stg2 patriot heads i am hoping i can rev this motor to 6500rpm maybe 7k then the little...
  18. S

    still working on 500rwhp car need help

    were u able to pull the motor with longtube headers on or no
  19. S

    still working on 500rwhp car need help

    never mind on the question about the cobra fuel tank i just got it off ebay for 600 bucks tank and hat with bumps i am hoping the will be enuff to feed 500rwhp
  20. S

    still working on 500rwhp car need help

    any help would be good :D
Top Bottom
Back
Forums
Menu