Search results

  1. 9

    TKO install problems

    Do you have adjustable upper control arms? I fixed ALL my vibration problems with a CORRECT length drive shaft (for my car 46.5") and matched or "zeroed out" my driveline angles with my adjustable uppers. No vibrations all the way to 5500 in fifth.:nice:
  2. 9

    STROKE IT OR NOT????

    Just what did you have done for $2500? Seems like both ends of the spectrum here.
  3. 9

    Hp guessing time!

    I don't think you'll get a "good tune" with the 24's. 320rwhp at 5200-5500 before it runs out of fuel. maybe 360rwhp at 6200 with 30's. JMO:SNSign:
  4. 9

    Searched speedo.Mines electric. Help

    I searched for speedometer calibrating,ect, and all i come up with is replacing the driven gear,for correcting for changes in axle gearing. My 95 vert has an electric speedometer hookup at the trans. :shrug: I switched to a tko 500 and plugged in the speedo and it was WAY off. As I came down the...
  5. 9

    354 start up,Bad injector???

    Started the 354 tonight, the chip JMS burned worked great, fired right off, no surge, smooth idle, no hesitation, no CEL. ...at first... then I got a CEL. at 2500 rpm you could tell something wasn't right, a miss. Checked spark with test light while running, every cylinder was firing. Checked...
  6. 9

    MSD superconductor wire's, too small?

    Want to but an extra set....cheap?:mad:
  7. 9

    New 354 and TKO are in! pics

    Thank's, I love doing things different, and love it when sombody says it won't work:D I have an 89 notch with a 306 for the track that turns big rpm to make the peak HP,but its a dog below 4500 rpm,thats not what I'm looking for on my street car:nono:
  8. 9

    New 354 and TKO are in! pics

    Yes I'm ready for it, that why I posted it the way I did. There are so many people out here to knock the cobra/gt40 intake,and iron heads,I thought I would try them and see just what I could do with them. I did ALOT of research before I dumped the cash into it ,so I have a pretty good idea as to...
  9. 9

    MSD superconductor wire's, too small?

    Mine won't fit. There just tooo damn short:bang: Putting the stock ones back on till I can come up with a solution. My valve covers may be a little taller but damn these things are short:mad:
  10. 9

    New 354 and TKO are in! pics

    It's a 302 block .30 over with a 3.47 inch stroke. As far as the combo,it's all 4340 forged, lightwieght bottom end with a girdle,and some iron roush heads (with a little work:rolleyes: ) tf rockers, a mild comp cam,and a hogged out cobra intake (let the flames begin). BBK 75mm tb,msd ign,cl...
  11. 9

    New 354 and TKO are in! pics

    Got the motor and trans installed sunday. worked on fuel lines and a/c tonight. Should be able to fire it up tomorow or wed. New TKO 500 bolted right up with new mount from energy suspension without doing anything to crossmember. I guess I'll find out if Iget the dreaded vibration in a day or two.
  12. 9

    MSD superconductor wire's, too small?

    I hope not .I'm installing mine tomorow:eek:
  13. 9

    Strokin' It

    You might want to think about a different radiator too...horsepower=heat
  14. 9

    Come and Get It!!! Engine is finally Installed!!! PICS

    Fixed that for you:D
  15. 9

    Come and Get It!!! Engine is finally Installed!!! PICS

    FTFY:p
  16. 9

    Come and Get It!!! Engine is finally Installed!!! PICS

    Looks awesome! Love the engine bay paint,good idea. Let me know what you think of the SSI,when you get it going.Sure you don't want to try it N/A first? I'm jealous. My motor is still sitting on the stand right now . We got the heads bolted up, and I mocked up the cobra intake with the new...
  17. 9

    Your opinions of this Intake/Cam/Head combo...

    There are plenty of people right here running the very same set up and producing the hp/tq your looking for. I have a friend with the stage 1 cam and street heat and it is very well manered on the street. If its a good price and it will fit what you want I;d say go with it.:nice:
  18. 9

    What gears for the 1/8th ?

    Need different gears.for an 89 notch that was set up for 1/4 mile with NO2. 302, 12.5:1 compression,with heavy ported windsor senior heads and ported victor jr with 750 holley,C4 with 3200 stall.All I know about the cam is that it is a custom nitros grind. The guy that had the motor built was...
  19. 9

    160 mph speedometer ?

    Hey guys,I'm new to the fox body's and wondering about the 89 notch I just bought. It has a 160 mph speedometer in it that looks factory. I have a buddy that has a 140mph in his 88 notch, he said his was a Tenn. trooper car. Can anybody tell me what the 160's came in? I did a search,but couldn't...
  20. 9

    ran at the track tonight! 7.68 @ 83.20MPH

    Gulfport is a full 1/4 ? Great! I'm working in Biloxi for a couple more weeks, maybe Ill just tow the car down there with me. I heard they had a track there ,but I didn't know it was a 1/4. Did I here right that they run on wednesday night? I want to see what this car will run in a full quater...
Top Bottom
Back
Forums
Menu