Search results

  1. MikeR351w

    Removing P/S pump, sealing rack...

    How did you loop it?
  2. MikeR351w

    Moroso Electric Drive water pump...How do they work???

    I have decided to install an electric water pump in my 93 LX5.0. I came across this contraption on summit racing. How in blazes does it work? What additional parts do I need? Pic attached... :hail2::SNSign::hail2:
  3. MikeR351w

    Throttle body stuck!

    Cool. I will try again. Any clue how to disconnect the throttle cables??
  4. MikeR351w

    Throttle body stuck!

    I am trying to remove the entire throttle body off my 93 LX 5.0 and it WONT BUDGE!!! I removed the air intake duct (plastic), the sensor wires, and the four bolts that attach it to the stock intake. I tried and TRIED but it WONT MOVE! Any tips?? Am I missing a few bolts that I did not take...
  5. MikeR351w

    Removing P/S pump, sealing rack...

    Anyone out there remove the p/s pump and seal the lines to the rack? Is it a good move? Is it safe? How do you do it if so??? Any help would be greatly appreciated!!! :) :SNSign:
  6. MikeR351w

    94 5.0 C/S Underdrive pulley same as...

    Is a 94 5.0 Mustang, MAC underdrive crankshaft pulley interchangeable with a 93 LX 5.0 crankshaft pulley? Any help would be greatly appreciated! Mike
  7. MikeR351w

    Screaming Hot, Hot, Hot!

    Sweet. I already upgraded to the 200 amp alternator, but I left the stock power wires on. Is that a big deal? Ive been running the car like this for a year and have had not problems. I really want an electric pump. What the heck is a controller? How hard is it to wire the pump? Is it...
  8. MikeR351w

    Screaming Hot, Hot, Hot!

    I have a 93 5.0 LX. I would like to upgrade to an electric water pump. If I did this, would I need to then get an electric fan? Also, I plan on removing the smog pump, since I have no cats. Will this negatively affect the engines idle or drive-ability??? Please help! :flag:
  9. MikeR351w

    Compass Rear View Mirror...

    Anyone ever try to install a new 05-08 Mustang GT compass style rear view mirror with auto dim. in a fox body stang??? If so, what wiring is involved?? :flag:
  10. MikeR351w

    Dreaded Oil Pan gasket replacement... Any Tips???

    I have a 93 Mustang 5.0L. My gasket is leaking like crazy! Any tips on the easiest way to replace it? How long will it take? I have a finger lift at work.
  11. MikeR351w

    Spindle question! Help!

    Are the spindles from an 87 Thunderbird 5.0 the same as a 87 Mustang 5.0??? Thanks!!!
  12. MikeR351w

    Ford Racing 5-Lug Conversion...Pros & Cons?

    Was it worth it??? Do you feel a stronger brake pedal and a shorter stopping distance that made the swap worth it?
  13. MikeR351w

    Ford Racing 5-Lug Conversion...Pros & Cons?

    I realize that, but I would need a lot of parts and want to have all of them new. I want to do it right the first time and not go back to fix problems.
  14. MikeR351w

    Ford Racing 5-Lug Conversion...Pros & Cons?

    Hey guys, I need new brakes all around on my 87 LX and I am going to purchase the Ford racing 5-lug conversion kit. I was wondering what benefits are there besides cosmetic? How much better is my braking going to be and is it worth the $3000??? Thanks!
  15. MikeR351w

    Smog Pump, Good or Bad? Q & A

    I fixed the screeching with an adjustment of the tensioner pulley. However, I would still like to get rid of the smog pump. How much HP would I gain from that? Just curious.
  16. MikeR351w

    Smog Pump, Good or Bad? Q & A

    Sure, Will do. I will run a shorter belt tomorrow and see if that stops the screeching noise. Also, I have another question about my pulleys. I went throught 2 alternators in one summer. Both had the same problem. The pulley on the alternator started to wobble. When you spun it, it...
  17. MikeR351w

    Smog Pump, Good or Bad? Q & A

    I am trying to figure out if my smog pump is good or bad and should bypass it. There is a noise comming from one of my pullies and all appear to be fine upon inspection, except for the smog pump. When I spin it by hand, with the belf off, it stops right away and makes a scraping noise.' Is...
  18. MikeR351w

    3G Alternator Upgrade-Now I have Head Light issues!

    Fixed!!!!!!!!!! :D :nice: :SNSign: :lol: :D The problem was not as complex as we thought. It turns out that the wire that goes into the wiper arm/turn signal/high beam switch was loose. Specifically, the large red wire that goes into the gray high beam electrical connector. All I...
  19. MikeR351w

    3G Alternator Upgrade-Now I have Head Light issues!

    Ok, I tried the HD lamp switch from the 88 GT and it still does not work. Again, I have all running lamps, turn signals, and every electronic item except for regular low beam head lamps. :bang: What else should I check?