Search results

  1. F

    Guide Coating

    can you use any 99 cent rattle can of paint to do Guide Coating, or does it have to be a special paint
  2. F

    SEM Primer

    Got some self etching primer today, 1 can..... is this good stuff. It came from a ppg shop. also after I sand all the paint off do I do anything else before priming?
  3. F

    measurements...

    Doug, I got mine in my tiny garage today, I used 14' long and 6' wide....the width is libral so I can get around
  4. F

    Waterproof Car Cover

    I need a cover to help proteck when the trunk, hood and doors are off, I do not intend to leave any bare metal for more than a few minutes
  5. F

    Waterproof Car Cover

    I need a waterproof car cover, What is the best kind and where might I find it? now that it is running I am going to start sanding and taking things off....but I don't have a shop
  6. F

    Much Help Needed

    Ha Ha Ha so she purrs like a kitten. a guy from work walked right up and stuck his finger in a 3/8" hole I forgot to plug. It was in the manifold right below the carb. Oops :lol: :damnit: :hail2:
  7. F

    Much Help Needed

    Bump
  8. F

    Much Help Needed

    Yes I did install it, I did use RTV on the ends. I just tried spraying pen-oil on on all poss leaks. How do I know if the vaccume deal on my dist is still good?? :bang:
  9. F

    Much Help Needed

    It idles pretty high.......I do not have a tach though
  10. F

    Much Help Needed

    :shrug: : So my car was running perfectly with stock 2bbl and intake. Here is what I have done: Performer RPM intake and Edelbrock 1405 600 Cfm carb. Here is my problem: When I shift into gear the car will die hard unless I push on the throttle when I shift and even then it runs...
  11. F

    Ford Throttle adapter for edelbrock

    Just got a Edelbrock 1405 and wondering if I need to get a Ford adapter kit for my 66 with a 289?
  12. F

    rebuild holley or not??

    I have a holley 4 barrel I bought off ebay "works great, very nice".... learned my lesson! :fuss: It seems to have a bent throttle plate as it will only idle fast and you can't slow it down and I had a mechanic work on it for me still no dice. Is it worth having this thing totally...
  13. F

    Is this a problem?

    Took it all back off and put more RTV on it and another set of new gaskets as the others riped on removal. So hopefully It will run well after the RTV dries...... by the way how long does that take?
  14. F

    woo Hoo

    Hungrymonkey and I got my intake and 4bbl on the 66. It still needs work, but man did that make a huge difference, it sounds like it has huge balls and the force out the tail pipe is 10 times better. On that note I do have to take the intake back off as the rear did not seal I didn't put...
  15. F

    Is this a problem?

    ya I am just trying to make sure that that 1/8" gap is ok.......if it is I think I will goopit up with some more RTV to make sure there will be no pin holes
  16. F

    Is this a problem?

    A friend and I installed my intake yesterday and we didn't use any gasket in the front or rear. It seems as the front is not seating all the way down to the block, it looks as if there is a 1/8" gap between the intake and block, it is filled with RTV but wil lthis be a problem / Has anyone else...
  17. F

    Outragous Shipping

    I can't find any company selling rear leaf springs that doesen't want an arm and a leg for shipping them to oregon. Anyone know of a place with ok shipping prices
  18. F

    Edelbrock Carb Choice

    no opinions
  19. F

    Edelbrock Carb Choice

    This is what I am thinking! http://store.summitracing.com/default.asp?target=partdetail.asp&autofilter=1&Ntt=edelbrock+carburetor&N=1005&part=EDL%2D9900&autoview=sku&Ntk=KeywordSearch
  20. F

    Edelbrock Carb Choice

    So is a 600 cfm edelbrock carb better with electric or manual choke. it will go on a 66 with 289 with a performer rpm (knockoff) intake manafold. I just want the car to have some balls. I am going to bag the used holley 600 cfm universal performance carb I got off ebay if anyone is...
Top Bottom
Back
Forums
Menu