Search results

  1. Fox_84

    How do you guys fit a tire with 275+ width on the rear?

    If you are wanting a 10" wheel, you better make sure you stick with stock length axles or you will never clear them. I assume 10" is what you are calling deep dish. If you use factory length axles you will still more than likely have to remove your quad-shocks. Then to keep from rearend hop...
  2. Fox_84

    5.0 Died at 10mph

    First thing that comes to mind here is possibly the fuel pump.........When you get in the car and turn it to the on position, without cranking it, just before it cranks, can you hear a humming noise in the rear of the car. The pump is located in the tank so you will have to lean your ear toward...
  3. Fox_84

    pics of relocated battery

    I forgot to mention that I am doing this without adding the cut-off switch, just to get the weight in the trunk, not for the track. What do I need to do different just to hook things without the cut-off?
  4. Fox_84

    pics of relocated battery

    Like the title says: I am looking to relocate my battery to the hatch area and looking for ideas AND PICS. how to mount it and possible mounting trays or boxes. Also, if someone could explain the size of wires and what type of welding wire I need and the type of ends I need. If someone could...
  5. Fox_84

    Undercoating My Car

    I tried POR-15 on my rear-end and I preped that thing like noone's business. I hated it. The paint itself is nice but it turns green and when you use the topcoat to keep it from turning green, that chassisblack is CRAP!!! you might do that then topcoat with something else, but their topcoats...
  6. Fox_84

    Undercoating My Car

    I have just recently spent much attention to the underside of my car. I went to a local speedshop that primarily restores older model vettes. The guy that does all the body work there told me to use epoxy primer (black). It comes in several colors but black is most desirable for this...
  7. Fox_84

    brake plumbing trouble!!!

    Can anyone help me with finding the banjo bolts and brake hoses?
  8. Fox_84

    brake plumbing trouble!!!

    I am talking about the two on each corner in the rear. The lines that go from the calipers and connects to the hard lines.
  9. Fox_84

    brake plumbing trouble!!!

    I am putting 94-98 gt rear disc on my 93 and cannot find anywhere to buy correct stainless steel braided hoses coming off the calipers or banjo bolts to bolt the line on. Any help, part numbers, etc. I am willing to put rubber hoses if that is all I can do.
  10. Fox_84

    Need help ASAP, carrier pin bolt broke off in rear end!

    Just a suggestion, but I just did this upgrade and used a new eaton locker. I have my factory locker and it is in excellent shape. I am interested in selling it. Dont know if you could buy a complete rear cheaper, but the factory locker in my car was only driven by me for less than 1,000...
  11. Fox_84

    rear disc brakes? still cant figure this out!!!

    http://store.summitracing.com/partdetail.asp?autofilter=1&part=RUS%2D693040&N=0&autoview=sku Check these steel braided lines out from Summit. They are a set of 5, both fronts, center rear, and each side in the rear where the factory rubber is on a rear disc car. Will these work if I go to...
  12. Fox_84

    rear disc brakes? still cant figure this out!!!

    are all calipers the same from 94-04 as far as the fittings on the hoses? Also, when I buy hoses, they will not come with banjo bolts will they? What thread and length are the banjo bolts that I need?
  13. Fox_84

    rear disc brakes? still cant figure this out!!!

    I am working on putting rear disc brakes on my 93. I have new rear calipers. I dont remeber what year they were for, I got them off ebay a while back, brand new rebuilt. I know they are for the 10.5 rotors and I have those. I believe they were for 94-98 gt. Are these all the same??? What I...
  14. Fox_84

    5 lug and disc brake swap Question!

    I have converted to 5 lug and disc brakes and now need to know a few quick things. First, the spacers that are needed for the axles to fill the gap between the axle and rotor, where do I get these? Also, if I am going to be running 1/4" wheel spacers, will I need them still? Also, if...
  15. Fox_84

    What is IT???

    I just completely rebuilt my rearend after taking it apart too many times to count. I was wondering though what the big chuck of metal is, that hangs from the rearend, underneath the pumpkin and is mounted in rubber? Can I leave this off or does it have to be on there?
  16. Fox_84

    15x10 draglites on Fox

    Anyone have any pix of their beat up fenders from installing 15x10 draglites in the rear of a fox? I am needing some kind of idea how much I am going to have to bash on my fenders before deciding on ordering the wheels or not. I plan to run a 275/50/15. Anybody got any opinions, tips, help of...
  17. Fox_84

    cleaning locker, what to use?

    It is brand new but I had to pull it back out because everything wasnt right. I had put the wrong kind of limited slip additive in it also, so now I need to clean all that off and put in the right type of additive with fresh gear oil again.
  18. Fox_84

    cleaning locker, what to use?

    I am wanting to clean all the old oil off the locker before reinstalling. What should I use and do to clean the locker up before reinstalling?
  19. Fox_84

    help setting up gears

    Well see my factory shim is a .027 and when i put everything new back together with the old shims and set the backlash to .008 the wear pattern seems to be a little high on the teeth of the ring. I dont know if this is called face or flank but I would call it valley and peak. It is a little...
  20. Fox_84

    anyone ever replace inner pinion bearing races in housing

    The pinion will have to come out to get the race out. and I am sure you know that the carrier has to come out for that. Other than that, you can do it with the rear end in the car. Just get everything apart and use a punch from the front side where the pinion shaft comes through the housing...
Top Bottom
Back
Forums
Menu