03 3.8 88k miles
Had issues with car wanting to die after starting, stalling when come to stops, and issues with it bucking randomly. Scanned and got P0340 code.
Replaced alternator which fixed it for a bit then same issue. Replaced sensor. Fixed it for a bit then same issue. Sent back...
Recently bought a 1995 Ford Mustang 3.8L V6 as a project car for $300. Didn't start or run, and it had been sitting in a garage for 4-5 years. It needs a lot of love.
The previous owner said it stalled while driving one day and he never looked into the problem. I'm a beginner and excited to...
Hey guys i just extracted a cam from a 3.8 95 v6 mustang, did some measurements and got a TOTAL lift of .430.
I dont have a way to measure Duration or LSA(although it is pretty tight), sorry.
.
Figured i would throw out that info. Someone is bound to find that handy when they decide to cam swap...
Do the 4.6L and 3.8L share the same motor mounts? Would aftermarket maximum motorsports 4.6 solid motor mounts also fit 3.8L V6?
Edit. The car is a 1998.
I have a 1997 v6 with a 1996 3.8 motor, eng wiring harness, ecm, dash wiring harness, cluster and column
Ive tried everything and searched everywhere Im not getting any spark from the coil pack the 96 car ran and drove before I did the swap into my 97 I've checked the crank posit in sense and...
This is the progress im at right now. I can add turbo #2 but the clutch cable and brake stuff is in the way of the downpipe.
I will be adding hood air scoops. I'll probably do metal scoops. I need to cut a bit more for the air filter as well.
Yeah, my hood's cracked. Hood pins are on the list also.
I need to remove the a/c system so i can put the turbocharger where i want it to be.
Soooo.. how do i go about this. absolutely ZERO info regarding.
Searching hasn't helped. It takes me to camaros, and diesels, and 5.0 liters and other non-related to the question.
My friend has a 1996 Mustang GT that he wants to LS swap (he's a sinner) later this summer, and I want to do a V8 swap in my car which is a 1998 Mustang V6. He said he'd sell it to me for $850, but I was wondering if I also needed to buy his transmission from him or if the two cars use the same...
Alrighty I'm new here. I just picked up a project mustang. It's a 3.8 V6 (unfortunately) with 209k on the clock. I mostly picked it up because it's a manual and the body is in great condition.... and it was a thousand bucks.
Here's what I would like to do. I want to build up another low mileage...
Going to be removing my passenger side exhaust manifold due to it being cracked completely in half right above where the flange connection is, managed to remove the 6 nuts fastening the manifold to the block , and the top egr bolt, but I can't seem to reach the lower egr bolt or the two bolts...
So i recently went out and picked up a Vortech Supercharger for my 94 v6 and had some questions i thought someone may have some knowledge about but first some overview of the car. So i got the car about a year ago at this point as basically a fill in car that would look cool till i could get...
Im pretty new to the mustang community, buying my 2004 v6 3.8L mustang just not even 6 months ago.
So far I have a catback exhaust system, cool air intake, short throw shifter, stage 2 spec clutch, RAM billet aluminum flywheel, and some raxiom LED halo head lights.
I really want to get this...
I have a 1998 3.8 V6 and I recently replaced the lower intake manifold gasket because it blew up and coolant was getting into the oil. Anyways, Fixed that, replaced plugs, Replaced injector o rings, changed the thermostat, flushed both system, Cleaned the MAF, the whole nine yards. Now, I've...
i have a 2001 3.8l that i have been driving daily. the body is in perfect condition so i was thinking about doing a 4.6 swap. i looked into it for a while and realized it was not worth it so now im looking into doing a turbo 3.8l. could any one give me any insight into this such as is it worth...
Hello everyone I got a 1995 mustang with a 3.8 in it and from a dead stop if you punch it it won't even bark the tire's is this normal? The tire's are just 225 /15 nothing special about them
I have coolant pooled up under my upper intake manifold near my passenger side valve cover. I recently replaced my thermostat and have a coolant sensor that I still need to put in. I can't tell if it's leaking from a cracked manifold or if it's a bad intake gasket. Which is more likely and how...
Hey everybody I just joined the forum and this is my first post. (Sorry if it's in the wrong place) I've been wanting to get a fox body for a while but don't really have the money for a nice 5.0. However, I see rollers for about $500 on Craigslist which is more in my budget. Now I have an old...
Okay, so i have a question, (I'm a bit of a newbie when it comes to mustangs)
I have a stock 2000 V6 3.8 Mustang, My friend has a rebuilt 301 5.0 with a 327 Stroker Kit.
He has all the tools and necessities to swap it into my mustang and is willing to do so, completely free, including...