camshaft

  1. C

    Need Help With P0340 Camshaft Synchronizer Code!

    99 mustang with I believe to be a 2002 engine 3.8 , only code I get is for camshaft I've replaced the alternator (with one off my other mustang) I know it's works btw , coil pack , spark plugs , oem ford wires, camshaft synch sensor, crankshaft sensor, camshaft synchronizer - now this is where...
  2. Tubes

    Need Help With Timing Issue New Motor

    Ok guys, I need some help. Pulling my hair out. I pulled the engine and did rings and bearings and changed the heads and camshaft. I went with trick flow 190 11Rs and a Anderson B31 camshaft. Here is the issue I'm having. I started the car and it fired right off. Idled very good and...
  3. J

    Engine Need Help With Valve Train

    So I got a 86 fox about a year ago with a 92 EFI roller motor and I'm rebuilding it and switching to carborated I pritymuch have everything done exsept for the valve train im looking and a set of heads with .550 max lift and the comp 35-302-8 and I'm thinking 1.6 stud rockers would that be...
  4. S

    E-street Heads & Cam?

    I bought a set of Used Edelbrock E-Street heads. Model number 5023. I am completely redoing the entire valve train on the heads with the exception of the guide plates and Exhaust valves. I have read where you can not run a hydraulic roller cam with these heads.. any ideas why? If I redo the...
  5. S

    P0340 Problem Figured Out But...

    So i have finally figured out the p0340 problem on my 2000 mustang gt. It turns out that after checking everything that the magnet or metel piece on the cam gear is no longer working. The sensor is not recieving a constant signal from it. And of course i have the windsor engine so i cannot just...
  6. How-To Camshaft Video

    How-To Camshaft Video

    Please LIKE my Facebook, if my videos are useful to you: http://www.facebook.com/OperationMustang How-To Camshaft Video
    • theStangDoc
    • Media item
    • camshaft howto
    • Comments: 0
    • Media category: Mustang Technical Videos
Top Bottom
Back
Forums
Menu