Hi all
I will be brief. I have a bone stock 1991 GT vert. I added the Bluetooth to the headunit by Todd Lane. I added a powered sub in the wheelwell and a small alpine amp where the football amp used to be. Stock head unit had RCAs added as well (Todd Lane). I have tried several grounds for the...
I have a 1988 Mustang and I’m needing assistance with some rewiring of the connector for the Microsquirt harness. Some of the pins came out of the connector on the harness side, not computer side. The harness side connector’s pin holes are too big I think which caused the pins to not be aligned...
So I have a 1992 5.0 with A9P ECU. Engine and T5 trans completely rebuilt. It start having issues starting and now isn’t starting at all. New Distributor, new capacitors in ECU, new injectors, fuel rail cleaned after finding clog, fuel pump works, I have spark at the coil and plugs. Still no...
I want to sell my car… I just don’t have time to enjoy it and could use the money. Clean title, no accidents, about 84k original miles. How much should I ask for it?
I have a new to me 1988 LX 5.0 with a brake issue. I don't know much about the car itself and its my first dive into a fox body. I've had a 66 Mustang for 30 years so I know enough to be dangerous. The LX has had a 5 lug swap with cobra brake calipers. The brake pedal goes to the floor and...
I picked up two cars for $500. A Notch and Hatch. Both '86 and they came with two 5.0 engines.
I'm working on the Hatch, but it's going to be a long go. I have pulled much of it apart already and will post start to now pics. Now I'm down to bare metal.
I've also taken apart one of the...
Hello,
I'm in the Philly suburbs with 3 mustangs.
A 45th Anniversary 'vert in red
And 2 1986 fox bodies. 1 Hatch and one Notch
The fox bodies have engines but not installed and ultimately I will likely only build one, the hatch.
I'm excited to be here and hope to use this forum to learn and...
I'm currently rebuilding the bottom end of my 1990 302 fox that is carbd i'm having to because I got a knocking sound from the d.s, anyways i thought while the engine is out why not replace the cam while the engine is out because i know i am to lazy to ever want to pull the engine again down the...
The horns on my 1987 GT convertible foxbody went out. I replaced the horn pad in the steering wheel in case that was the issue, and can tell it's working. The horns are still shorting out and blowing fuses, so I bought some new ones from LMR. I'd rather not pull the front bumper off and all that...
Trying to pick your brains on building a aod with 373 gears and heads cam intake. What all does it take to put 4r70w internals into a aod and what rebuild kits would you recommend any info helps just trying to get a game plan thanks.
Ok guys, I'm stumped and it might probably be a stupid error on my part but... long story short: tried to redo the timing on my MicroSquirt equipped 302 after changing the head gaskets and removing my EGR.
I've set my engine to TDC, stabbed in the distributor, made sure that the pointer was set...
Hello, I'm Justan from Detroit ("What up doe!"). This past July 31st, I finally got myself (another) Stang! This time, it's a Fox, like I've wanted since I was just a boy. For all their quirks and flaws, I've been in love with the Fox since I was damn near a toddler, but it wasn't until the 3rd...
I have a 1990 foxbody that I got handed down to me and it’s been sitting for over 10 years and I need help. I’m going to drain all the fluids out of the car first and my first question is to drain the gas can I just funnel it out or do I have to drop the tank and drain it out that way.
I have been planning on going all motor 400whp, the boss 302 looks good for the price but is the big bore 302 boss out of the box ready to go? if so what cubic inch does it come in? and which forged stroker kit is recommended for it?
Hello and good day everyone ! . . .
I am extremely new to this place, making my account only this week and this is not for myself but for a Puerto Rican friend of mine, she owns and is the 3rd owner of a " Fox Body Mustang 1988 AOD Transmission " 'stang. I've googled and found a total of 4...
I have a Stock 89 LX Convertible with a 5.0 inside it.. posted it on fb for 5k and a guy dm'd me and said he had a 97 Cobra with 3:27 gears, bbk Cold air Inrake, Bbk suspension, 133k miles, saleen rims, 5 speed, and says the vin comes back as a real cobra.. but the seats was changed to cloth...
So it was brought to my attention that both brake lights aren't working. I unscrewed the taillight plugs from the tail lights and all the lights works, turn signals, reverse, warning & tail lights but the brake lights don't turn on. Both the small light and the bigger light that screw into the...
I've wanted a fox body for a long time. The first Mustang I ever rode in was a fox body. The first Mustang I ever drove was a fox body. I’ve been a huge fan of these cars since I was a teenager and always wanted to own one. I also wanted a project car that I could tinker with and build up and...
Just picked this up. Runs great. Minor rust. Body is solid. Needs some body work. Interior is clean and complete. Trying to get a feel for what’s its worth before I start the restore. 136,000 miles.