2005 town car (4.6L 2v V8, 150k, runs on 5W-30). During cold start (especially in cold weather) knocking noise is heard mostly from one side of the engine for about 30-90 seconds, then quiet. I decided to change lifters (hydraulic lash adjusters) and rocker arms and inspect chain while I will be...
So i currently have a 93 lx 5.0 mustang with keith black 116 domed pistons, a Lunati Voodoo .571/.587 lift .282/.290 duration and a 110 degree lobe separation cam, now i have the stock junk E7 heads which have been ported and this is supposed to be a budget build and later on it will have a set...
[Sold]
Listed are new ARP Pro 7/16" Rocker Arm Studs (1 set), Part Number: 200-7201 for a Ford Small Block V8. I was saving these parts for a 5 liter (w/ Cleveland 2bbl heads) that I was going to put in a early model Mustang, but I no longer have that car. If you have bolt in rocker arms or...
[SOLD]
Listed are new ARP Pro 7/16" Rocker Arm Studs (1 set), Part Number: 200-7201 for a Ford Small Block V8. I was actually saving these parts for a 5 liter (w/ Cleveland 2bbl heads) I was going to put in a 66 Mustang, but I no longer have that car. If you have bolt in rocker arms or smaller...
i have the original 3:08 gears removed at 35,000 original miles replaced with 3:73, positraction if that makes a difference, also Stock shifter
Indianapolis In , 317-374-8668, text or call
$ 75.00 gears
$ 35.00 shifter
Trying to tune and road test my '67 Mustang 289 V8, but for some reason, the POLYLOCKS KEEP COMING LOOSE, and not always on the same cylinder or bank -- sometimes left, other times, right. I'm confident the valve adjustment procedure and pre-load and zero lash have been done correctly (performed...
Long time reader, first-time poster and I'm seeking some advice on a rocker arm nut issue. I've been working on my '67 Mustang 289 +.030 V8 with a fairly aggressive "street/strip" cam (290/228, .504 lift), Comp Cams Roller Tip "Rail Type" rockers using poly lock nuts (some type from JEGS I...