tr3650

  1. J

    TR-3650 Clutch Installation

    Just finished installing new clutch in TR-3650 (2002 GT), but there seems to be very little clearance (About 1/2 inch) between the clutch fork and the transmission housing (see first pic). Is this normal? Seems to be very little throw. Wondering if I did something wrong during install. Any...
  2. M

    TR3650 dragging noise early in gears low rpms

    Until 1300rpm there is a dragging metal on metal noise in every gear. Sounds like a metal cable dragging against something metal spinning. Noise goes away with higher speed at 1300rpm. No noise cruising above 50mph in 5th for instance at or above 1500 rpm. But there is noise early as every gear...
  3. B

    Transferrable Parts Between 2008 3v And 2002 2v

    Hey guys, I was wondering what you could swap over from a 2008 manual 4.6 3-valve to a 2002 manual 4.6 2-valve. Recently was given a wrecked 3V with all mechanical functions still working. The main questions I have is, could I put the 08 transmission into my 02, they are both TR3650, But his...
  4. T

    Ticking Noise

    For about 6 months now my car has been having a small Tap when I ONLY push the gas pedal down a little, also when I release it and it drops rms it starts again. Sounds like if you were to tap the plastic on the dashboard with your finger. Sounds like it's coming right where the tranny and engine...
  5. T

    Drivetrain Stiff Clutch Problem

    I bought an 02 mustang gt with a really stiff clutch. 1st I changed the clutch cable to a brand new sr performance one and that didn't do anything. I changed the clutch and flywheel to a brand new stage 2 clutch and lubed everything up thinking that'd do it but nope no luck. I have no idea what...
Top Bottom
Forums
Menu