• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

02 GT Stock Clutch Issues

  • Thread starter Thread starter BiggieWolf
  • Start date Start date Jul 22, 2005
B

BiggieWolf

New Member
Apr 17, 2003
78
0
0
New Windsor, NY
Jul 22, 2005
#1
  • Jul 22, 2005
  • #1
Ok, I know there have been a ton of clutch issue threads, and I went through quite a bunch of them before giving up and making my own thread.

I have an '02 GT, when the car is off, it does not go into gear smoothly. When the car is on and the clutch pedal is pushed down, it will not go into gear.

I just put the engine back into the car and am sure that everything was lined up properly. I checked the clutch cable, underneath the car and it seems to be pulling as it should be.

The only reasons for the inability to engage the car into gear, that I can come up with are:. A) lack of fluid in the transmission(but i don't know if that would have an effect on the clutch). or B) The pressure plate could have frozen(rusted), while the car sat outside when the engine was not in it, but the transmission was.

Any help that could be offered to shed some light on my problem would be greatly appreciated.
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
Jul 22, 2005
#2
  • Jul 22, 2005
  • #2
ok the first thing i would check is the clutch cable.. a clutch that is not disengagind fully can make it really hard too shift into gear or you may not be able too at all. if you have the stock quad and cable you need too pull up on the pedal untill you can get the car into gear with it running.



a rule of thumb you can go by.. if the trans goes into gear with the car off but not when it's on then it's probally a clutch concern. ( not disengaging all the way) if the trans wont go into gear when the car is off then most likely internal trans problem..
 
B

BiggieWolf

New Member
Apr 17, 2003
78
0
0
New Windsor, NY
Jul 23, 2005
#3
  • Jul 23, 2005
  • #3
Ok, I got underneath the car and checked the cable, by removed the shield. When the clutch pedal is pushed down the cable tightens and the arm moves just fine. It appears that it is not the cable.

It looks like i am gonna have to buy a new clutch...ugh more money to put into this darn thing. Thanks for the reply, if you have anymore advice its greatly appreciated.
 
You must log in or register to reply here.

Similar threads

00 4.6L V8 new clutch won’t go into gear when on?
  • Timboslice
  • Aug 15, 2026
  • The Welcome Wagon
Replies
3
Views
244
The Welcome Wagon Aug 21, 2026
Noobz347
N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
749
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
Swapping clutch pedal hanger-
  • woodsnake
  • Nov 8, 2026
  • Classic Mustang Specific Tech
Replies
0
Views
58
Classic Mustang Specific Tech Nov 8, 2026
woodsnake
M
1996 GT Speedometer electrical nightmare
  • moon96gt
  • Oct 7, 2026
  • SN95 4.6L Mustang Tech
Replies
2
Views
198
SN95 4.6L Mustang Tech Oct 17, 2026
CAMTWO1070
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
339
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?