Well, its finally complete. These were my steps to complete the job.
1. 2 Hillman Nylon hole plugs for the exposed holes, silver paint touch up paint, and a clear coat
2. Wiring Harness (you need a new one, running from the left panel inside the trunk, to the spoiler because it is run by LCD, not bulbs). There are about 5 clips/plugs with lights etc.
3. After the spoiler has been painted etc., I used double sided tape as shown below, to try and keep water from getting under the spoiler.
4. Line up the spoiler, make marks with a sharpie, and drill the holes (on 2001+ GT trunks, 2 of the original holes are used).
5. Throw it on and connect the brake light once the wiring harness is all set.
I had mine painted because it was originally shadow gray (got it off classifieds).. The paint shop repaired and painted my front bumper since it was damaged in a small accident. And since I was in a painting theme this month, i went ahead an painted the front grille horse flat black.
Let me know any questions
Wade
1. 2 Hillman Nylon hole plugs for the exposed holes, silver paint touch up paint, and a clear coat
2. Wiring Harness (you need a new one, running from the left panel inside the trunk, to the spoiler because it is run by LCD, not bulbs). There are about 5 clips/plugs with lights etc.
3. After the spoiler has been painted etc., I used double sided tape as shown below, to try and keep water from getting under the spoiler.
4. Line up the spoiler, make marks with a sharpie, and drill the holes (on 2001+ GT trunks, 2 of the original holes are used).
5. Throw it on and connect the brake light once the wiring harness is all set.
I had mine painted because it was originally shadow gray (got it off classifieds).. The paint shop repaired and painted my front bumper since it was damaged in a small accident. And since I was in a painting theme this month, i went ahead an painted the front grille horse flat black.
Let me know any questions
Wade