• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

'03 GT - whining at front of engine

  • Thread starter Thread starter IIGood
  • Start date Start date Mar 6, 2020

IIGood

Founding Member
Aug 1, 1998
4,252
1,214
224
Churchton, MD
Mar 6, 2020
#1
  • Mar 6, 2020
  • #1
Quick history on the vehicle as it could relate to the issue at hand: 2003 GT, manual, 183K miles. Entire clutch assembly was replaced at 160K with all Ford components (including the TOB). Tensioner pulley/arm assembly was replaced about 8 years ago. Water pump was replaced about 5 years ago. Fuel pump was replaced last month and the fuel system was cleaned out.

I started noticing a whine yesterday coming from the front passenger side of the engine. First I was noticing it as I was coming to a stop and the engine was idling down...right around 1000 RPM the whine would start and just whine for a few seconds. As the engine continued to idle, it would stay quiet. At first, this was while the car was in 1st gear with the clutch pedal pushed in. I put it in neutral, revved the engine a little up to around 1500, and the whine would come back. It doesn't happen at higher RPM...once it's past that 1500 mark, it sounds normal.

I parked the car and checked under the hood...opening the throttle a little would make the whine happen and I kind of pinpointed it to the front of the engine, around the passenger side cylinder head. I'm hoping it's just a whiny pulley but not sure which one. I don't think it's the power steering because that's on the other side of the engine and the noise isn't coming from there. Could there be anything internal that might make a whine? Timing chains?
 

wmburns

SN Certified Technician
Aug 14, 2009
5,892
514
204
Houston Texas
Mar 6, 2020
#2
  • Mar 6, 2020
  • #2
IMO for this problem hands down a mechanic's stethoscope should be your best friend. If you are not used to using one, it's amazing what you can hear using this tool. Simply touch the probe to the center shaft of each pulley and make note of the noise heard. How loud is it compared to other pulleys? What is the frequency of the noise?

Another "low tech" trouble shooting method is to remove the front accessory belt and see if the noise changes. If it doesn't then you will know that it's not a belt driven device or pulley at fault.
 
Reactions: glaze777, MattMan02GT, RaggedGT and 1 other person
You must log in or register to reply here.

Similar threads

R
1999 mustang gt whining noise
  • Rlee4252
  • Jul 16, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
113
1996 - 2004 SN95 Mustang -General/Talk- Jul 17, 2025
Mustang5L5
M
01 mustang 3.8 fuel pressure issue
  • Mhaley2006
  • May 29, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
161
1996 - 2004 SN95 Mustang -General/Talk- May 29, 2026
Mhaley2006
M
O
Sooty/Oily Front Engine & Pulleys
  • ozenator
  • Jun 15, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
293
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 22, 2026
Blackhawkxx
W
Electrical 91 GT Alternator Replacement Question
  • willrh111
  • Oct 22, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
375
Fox 5.0 Mustang Tech Oct 23, 2025
nickyb
Engine Random Misfire at idle.
  • Gulftown980x
  • Wednesday at 9:16 PM
  • SN95 4.6L Mustang Tech
Replies
11
Views
120
SN95 4.6L Mustang Tech Yesterday at 9:26 AM
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?