Well if you could get a set of 03 internals for a reasonable price they would drop right into an '01. Have you priced an 03/04 Cobra crankshaft lately? Big $$$. You could purchase aftermarket forged internals cheaper than the stock Ford parts.cory5489 said:hey this is my first day at this forum and i tried to use common sense and this seemed like the place to ask my question so if its not, i apologize. but has anyone thought of or done or have anything to say on putting 03 internals into a n/a 01? i dont have a cobra yet but soon i will and ive already thought about what im going to do to it. i plan on supercharging it later on. what are your thoughts/experiences with this?
That's a FANTASTIC PRICE! Hell, just the forged crank for these cars is $1400+!Dan_Soprano said:Take a look at www.svtperformance.com or www.modularfords.com in their respective classified forums. I know there is a guy selling a complete 04 Cobra short block with only 4000 miles on it for only $2500 shipped. I'd be all over it if I had some extra cash laying around.....
You are correct. He starts out stating he wants to put them in a n/a '01 Cobra, but goes on to say he plans on adding a S/C later on. So yes, the car would be a real dog with 8.5:1 compession n/a until he added the S/C.PonyboyIsaac said:if he did do this, wouldnt it be kind of dawgy(not a very responsive throttle) because of the low compression if he waits a while to put the sc on there??
I was unaware of the '01 haing a forged crankshaft. You sure about that?jeffisjacked said:umm, by "03 internals" do you just mean manley rods and pistons? you already have a forged crank... you can get the rods and pistons for like 8-900 dollars from shm or many other places...
Yeah, I was thinking that too. My 96 comes with the forged crank from the factory, and I thought all Cobra's beyond 96 did too.jeffisjacked said:umm, by "03 internals" do you just mean manley rods and pistons? you already have a forged crank... you can get the rods and pistons for like 8-900 dollars from shm or many other places...
Uncle Meat said:...I was unaware of the '01 haing a forged crankshaft. You sure about that?...
you'll be fine with stock internals with a blower, as long as u dont boost it over 10#s and as long as u have it all tuned right. Some people go beyond 10#s of boost with a good tune, but thats pushing it and u just dont know when its gonna go boomcory5489 said:so i could do this, but it would basicaly lag? what if i did it the opposite and bought a s/c and then internals. i didnt know about the crank either. so that makes things better, a little cheaper too. would i be ok using stock pistons and rods and such with a s/c, but have to just keep it at a low boost?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?