• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

04 cobra brakes on 94

  • Thread starter Thread starter drop92
  • Start date Start date Dec 3, 2008
Prev
  • 1
  • 2
First Prev 2 of 2

Chythar

Recently finished repairing my rear
20+ Year Stangneter
Aug 26, 2004
2,373
140
113
Foothill Ranch, CA
Dec 16, 2008
#21
  • Dec 16, 2008
  • #21
WHITE94COBRA said:
Cobra rear brakes are the same as the GT.
Click to expand...

I would revise this to say the rear brake CALIPERS and BRACKETS are the same as on the V6/GT. The bracket on the axle is larger, pushing the caliper out farther to accommodate the larger brake rotor. I've heard that the V6/GT bracket may need a bit of grinding to clear the rotor, but I didn't have to on my Cobra conversion. I'm using GT brake calipers on the Cobra rear axle (the calipers were already painted) and the Cobra calipers on the front.
 

Chythar

Recently finished repairing my rear
20+ Year Stangneter
Aug 26, 2004
2,373
140
113
Foothill Ranch, CA
Dec 16, 2008
#22
  • Dec 16, 2008
  • #22
Car Nut said:
The rear Cobra brakes are about as large as the stock GT front brakes.

I actually had problems with the rear stock GT brakes, so I decided to swap everything out for the 04 Cobra setup front and rear. This setup should give me another 10+ years of reliability with little more than pad replacement.

Anyone replace their rear brake lines? I haven't yet, but noticed that MM has a SS brake line kit for our cars (5 lines total: 2 front, 3 rear).
Click to expand...

I replaced my rear lines on my Cobra conversion. Can't say how the braking power has changed, haven't finished the project yet. The MM kit has brackets for the rear hoses, these replace the brackets spot-welded on to the factory hoses, which is a good thing. The kit is missing the factory bracket for the center line, but their instructions explain how to re-use the factory bracket. The brackets help keep the hard lines from flexing as the car moves around.

I didn't know about these kits and ended up doing a bit of fabrication and was able to re-use the factory brackets. I'll save some time on my GT and buy the MM kit next time.
 

revhead347

Apparently my ex-husband made that mistake.
20+ Year Stangneter
Jun 14, 2004
9,301
1,644
214
Acworth, GA
Dec 16, 2008
#23
  • Dec 16, 2008
  • #23
I had to fabricate the factory bracket for the center line quite a bit. I have a spare set of SS hoses for the front of a fox, I think I'll just use those on the back.

Kurt
 

WHITE94COBRA

New Member
Nov 14, 2003
816
0
0
HUNTINGTON BEACH
Dec 19, 2008
#24
  • Dec 19, 2008
  • #24
Exactly what my meaning was.

Chythar said:
I would revise this to say the rear brake CALIPERS and BRACKETS are the same as on the V6/GT. The bracket on the axle is larger, pushing the caliper out farther to accommodate the larger brake rotor. I've heard that the V6/GT bracket may need a bit of grinding to clear the rotor, but I didn't have to on my Cobra conversion. I'm using GT brake calipers on the Cobra rear axle (the calipers were already painted) and the Cobra calipers on the front.
Click to expand...
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

B
68 manual disc/drum master cylinder
  • Butchd88
  • May 27, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
0
Views
75
1965 - 1973 Classic Mustangs -General/Talk- May 27, 2026
Butchd88
B
Brakes Sealant for passenger side brake line fitting? (Weatherhead 7828)
  • dan50
  • Nov 9, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
271
Fox 5.0 Mustang Tech Nov 12, 2025
dan50
4v cobra exhaust compatibility
  • Kid wita 5oh
  • Feb 20, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
11
Views
375
1996 - 2004 SN95 Mustang -General/Talk- Mar 30, 2026
squeak93
8
87 lx 4cyl to v8 project 4 lug disc conversion questions
  • 87lx428
  • Mar 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
512
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 25, 2026
87lx428
8
Brakes Need help ID’ing which brake lines and seals I need
  • AnthonyA1234
  • Apr 2, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
22
Views
937
Fox 5.0 Mustang Tech Apr 14, 2025
limp
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?