• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

140 speedo

  • Thread starter Thread starter hsean
  • Start date Start date Mar 15, 2007

hsean

10 Year Member
Jul 24, 2006
656
69
69
dearborn,michigan
Mar 15, 2007
#1
  • Mar 15, 2007
  • #1
i changed the speedo from 85 to 140 and had a hard time until i figured out how to unclamp it.i put in a used 140 speedo i took off from a roller i bought and for some reason it does not work unless i tap the guage then it engages.so i took it apart thinking maybe its not clamped in all the way but no its still the same problem.could it be a bad speedo guage or bad cable?i did not try putting the 85 speedo back in to see if it really was the guage.this was all done in the fall and as soon as the weather cooperates i'll get back at it again.just curious if anyone else have had this problem
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Mar 15, 2007
#2
  • Mar 15, 2007
  • #2
I would pull the cable out of the transmission and make sure the teeth are good on the end of the cable, and good on the output shaft of the trans. If they are both good, I would say the speedo might be bad. I work at an autosalvage yard, and I sell these quite a bit to out-of-state customers.
 

hsean

10 Year Member
Jul 24, 2006
656
69
69
dearborn,michigan
Mar 15, 2007
#3
  • Mar 15, 2007
  • #3
i see your in michigan too which salvage yard do you work at?and were you speaking of just the 140 speedo or the cable i have an extra cable i can use
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Mar 15, 2007
#4
  • Mar 15, 2007
  • #4
I was talking about the speedo itself. If you have an extra cable, you could try that. With these older cars, trial and error is sometimes the best method.
 

hsean

10 Year Member
Jul 24, 2006
656
69
69
dearborn,michigan
Mar 15, 2007
#5
  • Mar 15, 2007
  • #5
how much do you normally charge for them i am in dearborn and your not too far from me
 

hsean

10 Year Member
Jul 24, 2006
656
69
69
dearborn,michigan
Mar 15, 2007
#6
  • Mar 15, 2007
  • #6
do you guys get alot of foxbody stuff there still?
 
You must log in or register to reply here.

Similar threads

Removing speedo cable from the VSS
  • 91AOD5.0LX
  • Mar 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 25, 2026
91AOD5.0LX
E
Drivetrain Odometer quit working
  • El Dee
  • Feb 6, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
350
Fox 5.0 Mustang Tech Feb 7, 2025
85GTStangGuy
W
Speedometer and shifting issues
  • wyatt-tetro891
  • Aug 17, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
324
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 18, 2026
wyatt-tetro891
W
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
533
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
Electrical Innovate PSB-1 is DOA? Am I an idiot? All plausable. Please Help
  • Dontknowchit
  • Apr 26, 2025
  • Fox 5.0 Mustang Tech
Replies
1
Views
694
Fox 5.0 Mustang Tech Apr 26, 2025
Dontknowchit
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?